Problems with totally remove quickaccess devices

[Peerf 0]

I have problems with totally remove quickaccess devices and they continues to generate activity in the logs.

I have the Quickaccess Netatmo using HC3L and removed the QA using: devices/remove device/other device/ and then BIN the QA.
The QA disappear correctly from my devices, BUT every minute I can see in the log file that there is heavy interaction with the former QA (debug, trace, error).

I have tried tried to “reconfigure mesh” z-wave, but no change to the activities and the HC3L is till busy with activities.

Advice needed to getting rid of the ghost activities without starting completely from the beginning.

Please login or register to see this attachment.

Edited September 10, 2023 by Peerf
Added file

[Peerf 0]

Isn't there anyone who can help?

On 9/10/2023 at 11:11 AM, Peerf said:

I have problems with totally remove quickaccess devices and they continues to generate activity in the logs.

I have the Quickaccess Netatmo using HC3L and removed the QA using: devices/remove device/other device/ and then BIN the QA.
The QA disappear correctly from my devices, BUT every minute I can see in the log file that there is heavy interaction with the former QA (debug, trace, error).

I have tried tried to “reconfigure mesh” z-wave, but no change to the activities and the HC3L is till busy with activities.

Advice needed to getting rid of the ghost activities without starting completely from the beginning.

Please login or register to see this attachment.

 

[Sjakie 138]

Try to delete the QA in Swagger if possible

[Peerf 0]

Thanks for your feedback, but I have never used Swagger before, and after many hours digging in to it I can't find anything that relate to QA or Netatmo.

Any other suggestions?

Do you think a backup/reset hub/restore will help?

[SmartHomeEddy 878]

Just-to-be-sure

 

Have you looked for hidden (quickapp) devices?

[Peerf 0]

sorry, but where should I look for hidden devices?

[SmartHomeEddy 878]

In your Dashboard --> settings --> devices

 

You can filter on hidden devices

[Peerf 0]

Bingo, YES. Thanks a lot!! I found 2 hidden qa and after I deleted them the logging stopped. I was close to throw everything out of the window....

[SmartHomeEddy 878]

Good to hear 👍👍👍