Disable output reaction on input

[Vikino 0]

Hello, maybe it is already somewhere here, but i did not found it...

It is possible to set implat that it does not close OUT1 after IN1 was activated? Im controlling security system with it, OUT1 Arm-pulse 0,5s , OUT2 disarm pulse 0,5s and IN1 should be used as notification that it is armed. But when i connect IN1 to ground it closes OUT1 and gets armed

 

I have theese parameters, so no scene should be lauched...

20,1,1

21,1,1

40,1,0

41,1,0

156,2,5

157,2,5

 

Thank you, Vitek

[Tim__ 125]

Yes you can separate the input from the output.  In the HC2 interface there is a switch for this. However you are correct, the online manual doesn't say what parameter number this relates to. Hopefully someone here can let you know.

[Vikino 0]

Ah, okay, i have it connected to Homey, not HC2 or HC3 So i hope that someone know what parameter is it...

[Martin_N 153]

@Vikino

Hello...

look for parameter 20/21 in the settings.

You can read about protection on page 35 of the SmartImplant manual.

You have to turn on "local protection". This separates input and output.