Jump to content

Welcome to Smart Home Forum by FIBARO

Dear Guest,

 

as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.

 

As a member you can:

  •     Start new topics and reply to others
  •     Follow topics and users to get email updates
  •     Get your own profile page and make new friends
  •     Send personal messages
  •     ... and learn a lot about our system!

 

Regards,

Smart Home Forum by FIBARO Team


Question

Posted

Jak dodać w local dwa urządzenia, na przykład: wellID= 126, 127? Nawiasy, przecinki nie pomagają, chodzi o to, że przy napisaniu dwóch local oświetlenie rozjaśnia się z opóźnieniem a chcę aby obie żarówki o różnych ID rozjaśniały się jednocześnie tak samo. Pozostaje napisać drugą scenę?   

6 answers to this question

Recommended Posts

  • 0
Posted

Hi,

 

something like this:

Please login or register to see this code.

 

Since you didn't specify what kind of light is in question there might be better ways to do this.

  • Like 1
  • 0
  • Inquirer
  • Posted
    23 godziny temu, Sankotronic napisał:

    Hi,

     

    something like this:

    Please login or register to see this code.

     

    Since you didn't specify what kind of light is in question there might be better ways to do this.

    A wiesz może jak napisać aby wszyskie ID uruchamiały się jednocześnie a nie z opóźnieniem?  ( chodzi mi o valli dimmer lub żarówki ikei ) Asocjacja nie wchodzi w grę : ) 

    • 0
    Posted

    Hi @Norbert Ziętara ,

     

    There is no LUA code that can do that with multiple devices since there is z-wave network in between with other traffic etc. If you need bulbs to turn on synchronized then you must connect them to one control device.

     

     

    • Like 1
    • 0
  • Inquirer
  • Posted
    37 minut temu, Sankotronic napisał:

    Hi @Norbert Ziętara ,

     

    There is no LUA code that can do that with multiple devices since there is z-wave network in between with other traffic etc. If you need bulbs to turn on synchronized then you must connect them to one control device.

     

     

    Thank you for the beautiful explanation : ) I'm turning off the local protection so that I can use all the buttons remotely. On the other hand, for example, I can't use remote protection to dim, brighten, and change the colors of Ikea or Hue bulbs. So you have to come to terms with it and approach it neutrally.  One more question about the walli controller... It is not possible to set the 0% position from the blocks. In the same way, only up to 1% of the block can be dimmed. At 0% it doesn't work. Only with LUA... Someday someone will fix it? 

    • 0
  • Inquirer
  • Posted

    Coming back to the LED rings, dimmer and controller walls, you can set the time out for the Wales controller to turn off at the same time... A dimmer also has a delay. Tested ;)

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Answer this question...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    ×
    ×
    • Create New...