Roller Shutter 4 "Monostable switches – hold to move" missing parameter?

[tinman 1,070]

wondering what are the "predefined step" when the RS4 is in "Monostable switches – hold to move" mode with venetian blinds.

In the manual there is something about the "predefined steps", however i have always 5 steps (with 90° slats) only and not something i can define free with parameters.

 

 

Any idea @m.roszak ?

Please login or register to see this attachment.

Edited September 17, 2024 by tinman

[jakub.jezek 371]

I think Its 20% jumps counting it from slats movement time from fully Closer to fully open.

[tinman 1,070]

1 hour ago, jakub.jezek said:

I think Its 20% jumps counting it from slats movement time from fully Closer to fully open.

 

actually each step is 18°, so 5 steps with 90° anngle slats or 10 steps with 180° angle slats. I understood "predefined" as user configurable, all i can do now is to set 180° (luckily the customer have 90° angle slats) to get more steps and accept wrong slat position in the app

[jakub.jezek 371]

11 hours ago, tinman said:

actually each step is 18°, so 5 steps with 90° anngle slats

OK. We are pretty fine with it and customers accept this behaviour. Here we have like 98% of blinds with 90° slats angle and we say to customers precise angle settings can be set in the app.

 

With Roller Shutter 3 we lost a few project as that generation of Roller Shutter does not behave like Roller Shutter 4 / Roll Control 2 in Hold to move settings as customers are use to Somfy as it is blind motors leader in Czech Republic.

[m.roszak 765]

predefined - static
user-defined would be changeable