Fibaro Implant use as Door Opener ?

[Tabsi 1]

Hello friends of the smart home

is there a possibility to use the Fibaro Implant as a front door opener ?

14V Ac in standby.

 

2 wires when they come together the electric door opener goes out

 

what do I need or can I simply connect it to the output

 

thank you 

Edited October 17, 2024 by Tabsi

[Martin_N 148]

@Tabsi

What does "opener goes out" mean?

The opener opens, and allows you to open the door?

Or does it "die" and nothing opens?

 

14VAC where is it?

Is it powering the opener circuit and is it supposed to close the circuit via some button or relay to open the door?

 

1) the load capacity of the SI output is only 150mA! I don't know of an opener that fits this value. Even low consumption openers have an activation current of approx. 280mA, which reliably destroys the SI output.

You will need to insert a booster relay. See my recent posts where I drew how to wire relays and SIs.

 

2) Do you want to use 14VAC to power the SI?

Impossible! SI is powered by DC voltage 9-30VDC!

I recommend using 12VDC.

 

eM 

[Martin_N 148]

@Tabsi

Look at the pictures.

 

 

 

 

Think of it as your 14VAC instead of 24VAC. Relay (contactor) C1 then represents the winding of your opener.

Only you know how it's actually involved, but I'm 99% guessing that this will be the case for you.

[Tabsi 1]

Hello Friends,

 

I would like to make my front door smart with the Fibaro implant
Fibaro is connected and works.
I would like to be able to switch the front door buzzer on and off via Siedle HTA 811.

 

attached pictures
Point 6.1 + I (the first 2 contacts from above is the door opener)

 

what do i need so that i can switch it if relay which (possibly link)

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

[Andrés Padrón 0]

Hi @Tabsi 

 

There is likely a 14 VDC adapter somewhere between the phone you use to open the front door and the electric door/gate opener. In the past, I've identified where that device is and inserted another adapter in parallel, controlled by a Single switch. You would only power that adapter when you turn on the Single switch, which should be configured in the "momentary switch option."

There may be other solutions, but in my area, it's challenging to find a Fibaro Device that can manage 14 VDC/18 VDC. Therefore, I need to turn on and off the adapter that produces this voltage.

For reference, here's a link to a power adapter for a "Scanavinni" electric gate opener:

Please login or register to see this link.

I've attached a connection diagram that might be helpful.

Please login or register to see this attachment.

[Martin_N 148]

@Andrés Padrón

Hi. The answer will be clamped on another question than it has been seized. Tabsi does not have a locked elevated from 18VDC but from 14VAC!

It has no problem with the watering (K is a company -friendly home), has a probed with a needle open.

 

@Tabsi

Tabsi, the way is, connect the free -free contact relay to the Tem Pinum 6.1 and I, but you have to pay the relegation, otherwise you destroy.