IN1 smart implant configuration

[bibbi1969 0]

Good evening, I need help to configure the IN1 input as a simple switch.
Project: insert a smart implant on the gas boiler flow valve to avoid unnecessary ignitions, delaying the process by a few seconds we could have a gas saving and safeguard the board relays with unnecessary switching.
I connected a small 12v transformer, set the IN1/OUT1 disconnection, set OUT1 bistable, made the scene (playing on HC3 works) I can't find the parameter to set IN1 as a simple ON/OFF switch any ideas?
Thanks

Please login or register to see this attachment.

[Smarti 0]

Hello, not sure what are you asking, but you can set the behavior of inpus in the smart implant main device

 

Please login or register to see this attachment.

 

But still, I would not recommend you to use smart implant for something like this. It can switch only contacts that are using less than 150mA and cant be used to switch loads at all. Check the manual of connecting the implant because the IN can have only his own neutral as a contact. The double smart module is a better choice.

[bibbi1969 0]

hi
thanks for the reply, but IN 1 connected to the sanitary water flow meter (on off contact) has no loads to manage, the load that gives consent to the boiler board is managed by OUT1. the difficult thing is to program in1 that turns on out1 after a few seconds.
I'm trying with chtgpt and some things are better but we are still at sea

[bibbi1969 0]

Why do I have a different screen? it is updated as inserted

Please login or register to see this attachment.