update 3.517

[K.Bergmann 2]

Dear Members,

I am proud to say, that we've released stable version 3x interface.

Also, we would like to thank all forum and bugtracker power users who supports our arrangements for this release!

Thank you for your great feedback!

FIBARO Development Team

After update to this software all devices will be automatically reconfigured to work with new system architecture. Reconfiguration progress will be shown in pop-up window.

WARNING! After this update all users will be deleted. Admin password will be reset.

This update can last longer than previous. If this update lasts longer than 30 minutes, please go to main HC2 address (e.g. 192.168.0.1).

If "System temporarily unavailable" text will appear during update, please wait - you will be redirected to the main page when all services start.

- New, quicker and future oriented system architecture.

- Rebuilded, faster configuration interface.

- Faster communication within Z-Wave network. Faster system reaction for devices states changes.

- Improved, much quicker sending commands to devices via the iOS application.

- Quicker scenes execution.

- Added support and debugging for Lua scripts.

- Automatic conversion from graphic block scenes to Lua scripts.

- Added possibility for Lua debugging.

- Sending sms/email/push notification from scenes.

- Integration with Satel alarm.

- Added support for new device types.

- Energy panel and managing devices with energy measurement.

- New, extended mobile interfaces.

- Power consumption options in block scenes.

- Additional options in video cameras.

- Z-Wave tab in configuration.

- New device inclusion window, informing user of new device configuration stages.

- Helios intercom support

- VoIP panel

- Information top bar and Dashboard - subpage with configurable information views

- New drenchers panel

- Views from cameras in Your Home section

- Possibility to manually add theoretical power consumption for devices not supporting power metering, visible in Energy Panel too

- Support for new device types, new device parameters.

- Modified scenes main screen.

- New Virtual Devices version - now you can add a button or slider executing Lua script.

- Changed configuration interface layout

- Moreover 3000 minor bug fixes and improvements.

[Guest nohed]

has not received an update to my HC2?

[A.Socha 133]

nohed, what version you got on your hc2?

[Guest nohed]

1.047

[A.Socha 133]

nohed, do you see in configuration button force update?

[Guest nohed]

no

[A.Socha 133]

nohed, do backup, later do full recovery to 1.038 ->1.040->1.047-> recover your backup -> do again update to 1.047 and then finally do update to 3.517

[Guest vayher]

nohed, do backup, later do full recovery to 1.038 ->1.040->1.047-> recover your backup -> do again update to 1.047 and then finally do update to 3.517

Yes, I think that you have older 1.x version with backup v1.047 recovered too. I left you PM, I can help you quicker with that or you can try the procedure described by A.Socha.

[maxxar 2]

maxxar,

It should be admin/admin

Login problem seems to be related to the vpn connection from work, no problem when I tried it at home.

[byackee 0]

Hi

Same problem for me. I upgrade hc2 from 3.516 to 3.517 and I have a lot of dead devices and they are not fonctional.

[rvorsten 0]

Hi

Same problem for me. I upgrade hc2 from 3.516 to 3.517 and I have a lot of dead devices and they are not fonctional.

+1!!!

[Guest nohed]

nohed, do backup, later do full recovery to 1.038 ->1.040->1.047-> recover your backup -> do again update to 1.047 and then finally do update to 3.517

Yes, I think that you have older 1.x version with backup v1.047 recovered too. I left you PM, I can help you quicker with that or you can try the procedure described by A.Socha.[/quot

I got the update but it stuck at 50%

[A.Socha 133]

nohed, what error code you get?

if there wos nothing and that was on instaling then was ok

from 48 -60% will take a lot of time

[Guest vayher]

I got the update but it stuck at 50%

Yesterday I've seen that you have very slow internet connection and there was problem with connection to debian.org (HC2 couldn't connect to this host for a very long time but at last it was successful). This update downloads really large amount of new packages and now your update stucked at 50%:

Installing additional software

So I think it's just downloading additional software now. Please wait and if progress bar won't move in 0.5h, then we'll take a look at that and try to install this update manually.

[Guest nohed]

I got the update but it stuck at 50%

Yesterday I've seen that you have very slow internet connection and there was problem with connection to debian.org (HC2 couldn't connect to this host for a very long time but at last it was successful). This update downloads really large amount of new packages and now your update stucked at 50%:

Installing additional software

So I think it's just downloading additional software now. Please wait and if progress bar won't move in 0.5h, then we'll take a look at that and try to install this update manually.

it is stuck on install does not download

[devriendtm 0]

Hi

Same problem for me. I upgrade hc2 from 3.516 to 3.517 and I have a lot of dead devices and they are not fonctional.

+1!!!

+2

what has changed?

[Guest Sander]

Enigma, problem with HRT4-ZW is fixed so you don't need do that

we testing one fix who can help with dead device but we need more time to test it, that way we suggest temporally use that option

fixed in what version? Running latest stable and still expering the problem.

[Krikroff 199]

Hi Fibaro team and thanks for your works but

Please login or register to see this image.

/emoticons/default_icon_confused.gif" alt=":-?" /> ...

Here is my experience after update my HC2 v1.047 to v3.517 (Stable):

- Cannot access the HC2 with my iPad -> (events on buttons aren't dispatched or not listen by my iDevice !)

- My Fibaro door / window sensor is dead and not fonctional (already awake manually and configured...)

- My ST814 (humidity / temp / main) is dead and not fonctional (already awake manually and configured ...)

- All virtual devices disappeared, i have lost all settings, icons etc.

- All scenes based on a "Day / Time" are never triggered... see b.1 scenes truly simple yet !

- Some devices are inverted see sceenshot a.1 ! I think this is why some scene no longer work. for eg. a.2 my aeonlabs dimmer is replaced in scene by Danfoss LC !!

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

[maxxar 2]

maxxar,

It should be admin/admin

Login problem seems to be related to the vpn connection from work, no problem when I tried it at home.

Since after update to 3.517 i can't access my homecenter2 thru Cisco Clientless ssl vpn access. I think there is some tuning to get it work again. What have been changed that can affect this? Maybe Ticket 0000059 is involved?

[Guest dsilletti]

With Cisco VPN Client (IPsec VPN) instead works perfectly, I didn't try ssl clientless,

Anyway I can confirm that is impossible to access the HC2 web page from iPad (login button doesn't work). Stopped work since 3.xxx beta

Please correct this problem, iPad is very useful to access the HC2 via web.

regards

Domenico

[Guest berga_s]

pablotibis, go to adv setting his and temporally check on option "not mark as a dead" on yes

I have update from 1.047 to 3.517 and all my door/windows sensor are marked as dead node.

I have to check the option "not mark as a dead" no temporally but permanently otherwise they come back in dead node status. Is it the right way to work?

Should I also have to check the "Polling dead devices"?