problem with door sensors scene and garage door

[Guest sk8er000]

hi everybody,

i need your help to solve a problem which is going to make me mad!

I have placed a SM103 Everspring (Sensor 1) below the garage door and a FGK101 FIbaro (Sensor 2) at its top.

there is a relay which controls garage door activity through a virtual device (i can't use the module fibaro roller shutter).

what i want to do is to prevent the garage door from being stopped halfway manually.

when it's "sensor 1 safe" and "sensor 2 breached" the door is completely opened

when it's "sensor 2 safe" and "sensor 1 breached" the door is completely closed

it takes about 20 second to open/close.

i've tried to reach my goal adding these two scenes.

scene 1

sensor 1= breached 0 seconds

and

sensor 2= breached 120 seconds

then

virtual device

scene 2

sensor 2 = breached 0s

and

sensor 1 = breached 120s

then

virtual device

but there is a problem with these two scenes:

if the door is completely opened and i activate the scenes, when i try to close it (so both sensors are breached for only 20 seconds and then sensor 1 breached and sensor 2 safe) after 120 second the door opens again automatically.

if the door is completely closed and i activate the scenes, when i try to open it (so both sensors are breached for only 20 seconds and then sensor 1 safe and sensor 2 broken) after 120 second the door closes again automatically.

how can i fix it?

thank you in advance!

[ Added: 2013-05-02, 12:27 ]

I SOLVED THE PROBLEM!

I've used the "devices group" option.

this is the working scene:

devices group (both sensors) == breached 60s

then

Garage input