Can't change Wake up interval for danfoss valves

[Quikdav 15]

Hi

 

I would like to change the wake up interval for my danfoss valves but it seems HC2 don't take into account my new value !!!

 

What's wrong with that ?

 

Does someone try to change them ?

 

Thanks

 

 

[petergebruers 1,265]

So you change it, save it, push the middle button on the valve, refresh the browser?

[Quikdav 15]

When I change it and save it, it is not recorded !!! I know that for devices parameters, they are taken into account at the next wake up...

 

For valve, nothing is mentioned to confirm my new value is saved !!

[petergebruers 1,265]

Change of "wake up" is not recorded in the status window, for any device. But changes to parameters ARE confirmed at the top of your screen. "Wake up" is not a parameter... That's why I was specific about the procedure. I used it 2 days ago on LC12 and LC13. Change "wake up", save (observe it reverts to the previous value! Ignore this!), push the middle button on the valve, maybe wait a few seconds, refresh the browser. The new value should be displayed. If that doesn't help... I'm out of ideas.

Please login or register to see this image.

/emoticons/default_icon_sad.gif" alt=":-(" />

[Quikdav 15]

ok thanks I will try it if it works for you...

[trash 1]

I had the same problem with one of my valves. The wake up internal was set to 0 and couldn't be changed. Whatever I set was ignored upon saving. The thing that fixed it was to re-add the device. Something must have gone wrong during initial adding.

[petergebruers 1,265]

I agree with @trash... I just thought of something else... these thermostats don't support rechargeable batteries. It's in the manual, and I've tried some NiMH, some years ago. The LC-12 may seem to function, the display lights up and the motor may spin, but it really doesn't work well. Never tried with an LC-13 but it is still in the manual of the LC-13: "Rechargeable batteries must not be used.".