Popp wireless keypad

[clafib 3]

Presented at IFA 2017, will be on sale during Q3 2017.

Will be supported as a scene controller by Fibaro ?

 

Here the link to an e-store ( at the Popp main site, actually this product is not present) :

Please login or register to see this link.

 

Edited October 10, 2017 by clafib

[Rune Steffensen 0]

It is supported altho no direct support as of 4.150. The device has its own scene control page in the settings, where ID 1-23 can be used to run any action or scene.

 

[clafib 3]

Thank you for the answer.

So if i buy it , it will works straight out-of-the-box with the HCL (without the need of the LUA code or VD) to, for example, disable or enable an alarm ?

 

[Rune Steffensen 0]

I used normal scenes. BUT: the keypad is currently not working with the latest firmware. Hoping for an update to fix that. POPP says Fibaro knows and is on it.

[clafib 3]

So, works on 4.150 and NOT works on 4.151,2,3 beta ?

Correct ?

 

[clafib 3]

Purchased and added to my system.

Works great.

The only thing that don't works ( i don't know how it works) is the tamper sensor.

It shows "never breached" even when i remove the cover.

 

[clafib 3]

Works also the tamper.

I have checked "tamper tripped" on motion sensor with a scene (without arming it, no  need) and opening the keypad will give me a message.

All works fine.

 

 

[pepite 0]

Hello,

 

Is anybody has a scene to control his Keypad popp ? Please.  Thanks

[clafib 3]

it's not difficult..

 

if a user entry the second code  (chiave 2):

 

Please login or register to see this image.

/monthly_2018_09/57095138_2018-09-1709-41-09.png.ad508886bba92bc4c3c5121bc010969e.png" />

 

if a user push the keypad doorbell:

 

If a user make an error in the entry code:

 

If a (user ?) try to open the keypad (tampering):

 

 

 

Codes 1-20:   user codes.

Code 21:         keypad Doorbell.

Code 22:         keypad doorbell pressed twice.

Code 23:         error entry.

 

it'all.

 

 

Edited September 17, 2018 by clafib
inserted all the keypad codes

[david.vanoudendycke 0]

Hi there,

 

Anyone knows if the Popp Keypad is compatbile with HC2 version 4531 Beta? 

It includes as "unconfigured device" and device won't wake up after pushing the bell key , needed for (soft-)reconfigure.  Had several exclude & include... always the same problem.

I got it working once, under version 4530. I was stupid enough to upgrade HC2 firmware to 4531 Beta, while still struggling to get the Popp Keypad working properly. So now I don't know it the problem is on the HC2 side or on the Keypad side?

 

Possibly anyone knows where to find the 4530 firmware (recover from file). I would try going back from 4531Beta to 4530, because I know it worked at least once there.

 

Thanks