Best method for setting Home/Away temperature?

[Kikkomana 0]

Hi.

I'm new to HC2 and the only thing connected to the system is 14 Multireg thermostats (same product as

Please login or register to see this link.

)

 

The temperature will be set something like this:

	Home Temp	Away Temp
Termostat 1	22°C	7°C
Termostat 2	21°C	7°C
Termostat 3	22°C	7°C
Termostat 4	20°C	7°C
Termostat 5	21°C	7°C
Termostat 6	18°C	7°C
Termostat 7	18°C	7°C
Termostat 8	15°C	7°C
Termostat 9	17°C	7°C
Termostat 10	15°C	7°C
Termostat 11	16°C	7°C
Termostat 12	15°C	7°C
Termostat 13	15°C	7°C
Termostat 14	20°C	7°C

 

I tried using the Heating Panel, but since I have a lot of different "Home" temperatures, I would have to create at least 7 different Zones in the Heating Panel.

When I then enable the "Holiday mode" I can select 7 degrees as away temp and then thick all the zones. And to turn it off I have to disable each of the 7 zones. I want to find a more effective solution.

What I like about the Heating Panel, is that if I by accident change the temperature to say 12:

Please login or register to see this attachment.

After a few seconds it jumps back to the temperature set in the Heat Panel (here Holliday mode is set to 7degrees):

Please login or register to see this attachment.

In my eyes it looks like the Heat Panel always "wins" over what temperature is set?

 

Since I want an easy Home/Away button I have tried to create a virtual device with 2 buttons and I wonder if this is correct:

Home-code

Please login or register to see this attachment.

 

Away-code:

Please login or register to see this attachment.

 

I'm going to change the code, so the Icon also changes between the 2 statuses, not only the label name.

It looks like this now:

Please login or register to see this image.

/monthly_2017_09/image.png.06264378984d4014fd5f2b6c3ffae0fc.png" alt="image.png.06264378984d4014fd5f2b6c3ffae0fc.png" />

 

When I look at My house the virtual device looks like this:

And I have to click the "open?" symbol to click the Home/Away buttons. Is it possible to get those buttons at the "Main" screen?

 

Is it a better way to set Home/Away temperatures then what I'm trying right now? 

Please login or register to see this attachment.

[Stian 0]

Did you find a solution for this?

[RobertL 21]

I made two manual scenes. One that sets all the Multiregs to "heat" mode and one that sets them to "energy save" mode.

Then I set these two temperatures individually on each thermostat.