Danfos thermostat set to 20.5 and red 21 with down arrow

[kunoch 27]

I have a few radiators set to 20.5 °C, this is also what i see on the thermostat itself.

In the android app, I see 20.5 and right to it a red field showing 21 with a down arrow. What does this mean?

I do not have this behavior for thermostats set to 20 or 18.

I was searching for a manual for the android app, but could not find it. It might give me the answer.

Please login or register to see this attachment.

Screenshot shows what I see, but wrong temperature. What does the red field mean?

Edited October 1, 2017 by kunoch

[hTiger1 50]

Hi
The red field is a drop down box, the reason it shows wrong is, (I think), Fibaro has not made the field so it can show decimals.

 

For example, if the left page shows 21 and you choose 22 then the field is red until Danfoss is set to 22 and the red number disappears.
For example, if the left page shows 21 and you choose 20, the field is blue until danfoss is set to 21, and the blue number disappears.

 

But if you choose 21.5 as you can, for example from the computer, the two numbers will not be the same and the problem you describe will occur.

There must be an error that you can not choose half degrees on the android phone.

[kunoch 27]

thanks, that answers my question, so I do not bother anymore