Push-dim / switchdim what Module to use

[kroeatschge 29]

Hi guys,

i have installed dimmable LED Strips. 

They are powered by DALI drivers from tridonic as mentioned in another topic. 

As I don’t want to go the dali route I want to use the push-dim feature which is also supported. 

 

I have installed Fibaro single switch 2 modules. Unfortunately I can’t push-dim with them. At least I haven’t found out how. 

They only switch on and off. 

 

What module do I need to be able to long press my toggle switches to get push-dim working?

 

Short press should toggle on/off and a long press (as long as I hold the button)  should dim up/down. 

 

Thanks for hints.

kro

 

Please login or register to see this image.

/monthly_2018_05/276C635C-8DE7-4847-97E0-E396ECC0E4F0.png.e95bfe13730998bd13a84d84a326e4a1.png" alt="276C635C-8DE7-4847-97E0-E396ECC0E4F0.png.e95bfe13730998bd13a84d84a326e4a1.png" />

 

 

[Javier Carelli 0]

On 6/5/2018 at 12:27, kroeatschge said:

Hola chicos,

He instalado tiras de LED regulables. 

Son alimentados por controladores DALI de tridonic como se menciona en otro tema. 

Como no quiero ir a la ruta de Dalí, quiero usar la función push-dim que también es compatible. 

 

He instalado 2 modulos de conmutador único Fibaro. Desafortunadamente no puedo presionar con ellos. Al menos no he descubierto cómo. 

Sólo se encienden y apagan. 

 

¿Qué módulo necesito para poder presionar por más tiempo mis interruptores de palanca para que funcione push-dim?

 

La pulsación corta debe activarse / desactivarse y una pulsación larga (siempre que mantenga presionado el botón) debe atenuarse / atenuarse. 

 

Gracias por las sugerencias.

kro

 

Please login or register to see this link.

 

 

 

Good morning, could you solve it?

[Guest fat]

Switch 2 modules are not able to dim, they can only switch on or off. If you wish to push and hold to dim you will need a Dimmer 2 module with momentary (bell press) switches and depending on the load may also require a bypass 2

[Ronish 3]

On 5/6/2018 at 6:27 PM, kroeatschge said:

Hi guys,

i have installed dimmable LED Strips. 

They are powered by DALI drivers from tridonic as mentioned in another topic. 

As I don’t want to go the dali route I want to use the push-dim feature which is also supported. 

 

I have installed Fibaro single switch 2 modules. Unfortunately I can’t push-dim with them. At least I haven’t found out how. 

They only switch on and off. 

 

What module do I need to be able to long press my toggle switches to get push-dim working?

 

Short press should toggle on/off and a long press (as long as I hold the button)  should dim up/down. 

 

Thanks for hints.

kro

 

Please login or register to see this link.

 

 

 

Hi,

I have exactly  the same problem,

Trying to use a Fibaro module to control LED Push-Dim driver.

Fibaro Dimmer 2 is designed for  Triac Phase-Cut driver so there is no use to it in this application.

Push-Dim driver are controlled by regular Momentary Switch (Push Button - Short press Toggle on/off, Long Press Dim),

So, My logic says you can use Fibaro Switch with Momentary Switch Connected to S1 to simulate the action of a Regular Momentary switch or Push Button.

You can use the Auto off function with time parameter set to 0 to create the fast ON/OFF action which is like short press on the button , this will turn the lights on/off , tested it and it works.

Still didn't find the right solution for simulating the long Press for the Dim function.

If you found any solution please share.

 

Thanks.

Roni s.

 

[kroeatschge 29]

..

Edited February 26, 2020 by kroeatschge

[kroeatschge 29]

@Ronish check pm

[kroeatschge 29]

hey guys,

look what I found

Please login or register to see this link.

. Maybe sunricher is solving this issue finaly for us:

 

SR-2411-ZV-DIM a Z-Wave to DALI convertor. Not specifically a push-dim solution, but I think most push-dim are DALI dimmers.

Unfortunately no place to buy it so far.

 

BR - kro

 

Please login or register to see this spoiler.

 

[kroeatschge 29]

I asked the guys of robbshop about the sunricher devices.

They try to order some and provide them in their shop ?

 

br- kro

[vly 0]

On 3/8/2020 at 11:36 AM, kroeatschge said:

hey guys,

look what I found

Please login or register to see this link.

. Maybe sunricher is solving this issue finaly for us:

 

SR-2411-ZV-DIM a Z-Wave to DALI convertor. Not specifically a push-dim solution, but I think most push-dim are DALI dimmers.

Unfortunately no place to buy it so far.

 

BR - kro

 

Please login or register to see this spoiler.

Hello guys

 

I'm in the same situation here

I have a LED Luminaire driven by a OSRAM OTi DALI 50/220-240/1A4 LT2 FAN (I can control it with ON/OFF, PUSH-DIM or DALI).

 

Thanks kroeatschge for the Sunricher tip. Have you been able to test it ? 

 

My understanding is that using the dali interface would require a DALI bus already in place... with a DALI power supply on that bus (which I don't) !

 

Cheers

 

V

[kroeatschge 29]

hi @vly,

no, unfortunately the device is not available anywhere.

It only appears in some PDFs.

 

The only available options are for Zigbee->Dali like

Please login or register to see this link.

.

If you are in the lucky situation to have a controller that also supports Zigbee you can try that device.

 

BR - kro