CoolMasterNet Plugin Integration

[SBSD 4]

Hi -

We have connected the CoolMasterNet device to a Daikin VRV HVAC Outdoor Unit and downloaded Coolmaster plugin on HC2 interface...

The Indoor Units can be configured and appear very well...

But the individual units & all Coolmaster items stop working after sometime and they have to be downloaded again as L1.102 etc etc into Unassigned and then do the assigning all over...

This is happening many time.

can you pls help and if someone has an input in this regard.

- Sanjaya

([email protected])

[TN92 1]

I have the same issue..

 

I have 10 Cool plugs with a CooLinkHub and after adding and renaming everything, it just stops working a couple of days later!

 

One thing i noticed is that it also makes the Fibaro web UI much slower when viewing and editing devices! 

 

Its a potentially great plugin but i hope they improve it

[EGMjacky 0]

We have connected the CoolMasterNet device to a Daikin VRV HVAC Outdoor Unit and downloaded Coolmaster plugin on HC2 interface...

We have 21indoor unit ，use coolmosterNet to controll is very fast，but Fibaro web UI much slower when viewing and editing devices! 

we have CoolMasterNet protocal but i don,t  know how to use lua code send command to CoolMasterNet 

i try 

can you help me ~

 

 

local id = fibaro:getSelfId(); 
local ip = fibaro:get(id, 'IPAddress')  
local Port = fibaro:get(id, "TCPPort");

local _vd_icon = fibaro:get(id, "deviceIcon");
-- Set VD icon with general icon ------------------------------
fibaro:call(id, "setProperty", "currentIcon", _vd_icon);
---------------------------------------------------------------

--Default TCP/IP port ：10102

--open a local socket
socket = Net.FTcpSocket(ip, Port);
--set the read timeout
socket:setReadTimeout(1000);

Line	Dot	Indoor Number
Ln	.	X	YY

local hex=string('L1.102/x0D/x0A')

--local hex=string.char(0x03, 0x06, 0x00, 0x20, 0x00, 0x01, 0x48, 0x22, 0x0D, 0x0A)

--fibaro:debug(tostring(hex))
b,e=socket:write(hex)
 

-- close socket
socket:disconnect();
-- destroy object
socket = nil;

 

[swapnil_blr 0]

The Coolmasternet device is not able to support multiple connections at the same time, hence you might see a slugish peformance while using the plugin. Also, if you have too many devices open at the same time it starts creating further issues. 

 

Here is a sample code I used in a virtual device. It works fine. This changes the temperature of the device in the variable CMDevice to 19 Degrees. You can refer to the Programmers manual for other commands that will work with Coolmaster 

 

local selfId        = fibaro:getSelfId();
local ip            = fibaro:get(selfId, 'IPAddress');
local port            = fibaro:get(selfId, 'TCPPort');
local connection    = tcpSocket
local CMDevice         = 'L1.101'
fibaro:debug('Starting Execution');
tcpSocket = Net.FTcpSocket(ip, port)
local command       = tcpSocket:write('temp '.. CMDevice .. ' 19\n')
fibaro:sleep(500)
result, err = tcpSocket:read();
fibaro:debug('Completed');
tcpSocket:disconnect();
fibaro:debug('Disconnecting');

 

 

 

[SBSD 4]

On 12/25/2018 at 8:48 PM, SBSD said:

Hi -

We have connected the CoolMasterNet device to a Daikin VRV HVAC Outdoor Unit and downloaded Coolmaster plugin on HC2 interface...

The Indoor Units can be configured and appear very well...

But the individual units & all Coolmaster items stop working after sometime and they have to be downloaded again as L1.102 etc etc into Unassigned and then do the assigning all over...

This is happening many time.

can you pls help and if someone has an input in this regard.

- Sanjaya

([email protected])

It all works very well now... looks like CoolMaster has made necessary into its plugin... I love their responsiveness, all the same!

[KSuski 0]

Do you have a solution for downloading status information, whether on or off ?