Broadlink HUB 1.0 (release)

[10der 832]

Hi!

 

Please login or register to see this attachment.

 (supported a new RM4x devices.)

 

features:

 

• discoverDevices

• pairDevices

• learn

• getSensors

• sendIRCommand

 

 

-- (0 - none, 1 = WEP, 2 = WPA1, 3 = WPA2, 4 = WPA1/2)

fibaro.call(1948, "pairDevices", "HOME", "myWiFipass", 3)

 

fibaro.call(1948, "getSensors", "192.168.1.51")

 

fibaro.call(1948, "learn", "192.168.1.51", 0x51da) -- RM4

 

fibaro.call(1948, "learn", "192.168.1.39") -- RMx

 

local irRfCode ="JgBoAAABKZUSExEUETgSExITEhMSExEUEjgROREUETkRORE5ETkSNxMSExISExM3EhMSExITERQSOBE5ETkRFBI4EjgSOBE4EgAFLQABKUsRAAxkAAEnTBIADGMAASlLEgAMYwABKEwSAA0F"

fibaro.call(1948, "sendIRCommand", "192.168.1.51", irRfCode, 0x51da) -- RM4

fibaro.call(1948, "sendIRCommand", "192.168.1.39", irRfCode) -- RMx

 

some codes for popular devices

Please login or register to see this attachment.

 

NOTICE: 

broadlink by default locked by own clouds.

please reset the device: long press on the device reset button while blue LED statred blinking slowly

then connect to WIFI from HC3. it`s very easy

Please login or register to see this image.

/monthly_2020_11/image.png.f65acb856469a915154dba3561d95a16.png" />

 

 

and send to pair message with your wifi network name password and connecction type 

after the paring process bule LED should blink off

 

 

enjoy HA.

O

 

 

 

 

Edited November 13, 2020 by 10der

[Petramg 0]

On 12. 11. 2020 at 20:01, 10der said:

Hi!

 

Please login or register to see this attachment.

 (supported a new RM4x devices.)

 

features:

 

• discoverDevices

• pairDevices

• learn

• getSensors

• sendIRCommand

 

 

-- (0 - none, 1 = WEP, 2 = WPA1, 3 = WPA2, 4 = WPA1/2)

fibaro.call(1948, "pairDevices", "HOME", "myWiFipass", 3)

 

fibaro.call(1948, "getSensors", "192.168.1.51")

 

fibaro.call(1948, "learn", "192.168.1.51", 0x51da) -- RM4

 

fibaro.call(1948, "learn", "192.168.1.39") -- RMx

 

local  irRfCode = "JgBoAAABKZUSExEUETgSExITEhMSExEUEjgROREUETkRORE5ETkSNxMSExISExM3EhMSExITERQSOBE5ETkRFBI4EjgSOBE4EgAFLQABKUsRAAxkAAEnTBIADGMAASLE

fibaro. volání ( 1948 ,  "sendIRCommand" ,  "192.168.1.51" , irRfCode,  0x51da ) - RM4

fibaro. volání ( 1948 ,  "sendIRCommand" ,  "192.168.1.39" , irRfCode ) - RMx

 

některé kódy pro populární zařízení

Please login or register to see this attachment.

 

OZNÁMENÍ: 

Broadlink je ve výchozím nastavení uzamčen vlastními cloudy.

resetujte zařízení: dlouze stiskněte tlačítko reset zařízení, zatímco modrá LED dioda bliká pomalu

poté se připojte k WIFI z HC3. je to velmi snadné

Please login or register to see this link.

 

 

a pošlete zprávu o spárování s heslem názvu vaší wifi sítě a typem připojení 

po procesu párování by měla blikat LED dioda

 

 

užijte si HA.

Ó

 

 

 

 

Ahoj, jak pošlu zprávu s názvem a heslem?

[10der 832]

45 minutes ago, Petramg said:

Please login or register to see this link.

Ahoj, jak pošlu zprávu s názvem a heslem?

fibaro.call(1948, "pairDevices", "HOME", "myWiFipass", 3)

[Petramg 0]

Nainstaluji Broadlink hub V1-release, to zvládnu,ale nevím co dál.... tohle někam vložím? Změním pouze Home a my Wifipass? Promiň,jsem začátečník a učím se

 

-- (0 - none, 1 = WEP, 2 = WPA1, 3 = WPA2, 4 = WPA1/2)

fibaro.call(1948, "pairDevices", "HOME", "myWiFipass", 3)

 

fibaro.call(1948, "getSensors", "192.168.1.51")

 

fibaro.call(1948, "learn", "192.168.1.51", 0x51da) -- RM4

 

fibaro.call(1948, "learn", "192.168.1.39") -- RMx

 

local irRfCode ="JgBoAAABKZUSExEUETgSExITEhMSExEUEjgROREUETkRORE5ETkSNxMSExISExM3EhMSExITERQSOBE5ETkRFBI4EjgSOBE4EgAFLQABKUsRAAxkAAEnTBIADGMAASlLEgAMYwABKEwSAA0F"

fibaro.call(1948, "sendIRCommand", "192.168.1.51", irRfCode, 0x51da) -- RM4

fibaro.call(1948, "sendIRCommand", "192.168.1.39", irRfCode) -- RMx

[Petramg 0]

On 11/14/2020 at 9:29 AM, 10der said:

Ahoj,nerozumím jak to nastavit,poradíš prosím?

 

Edited November 23, 2020 by Petramg

[Flipoidix 6]

Fantastic work! the QuickApp works perfectly with the RM4.

 

I can use the RM4 with both the broadlink app and this QA ( unlock the device in the broadlink app , there is no need to pair the device with fibaro, or resetting the device  )

 

May I suggest  adding child app for each device discovered? ( where we would input the macaddress, ip, kind and sensors for each device )

[10der 832]

2 hours ago, Flipoidix said:

May I suggest  adding child app for each device discovered? ( where we would input the macaddress, ip, kind and sensors for each device )

not sure. cuz it's jist like controller/router it doesn`t care anout devices. at all.

[Petramg 0]

Můžete mi pomoct? Nevím kam mám co přidat. nainstaluji Broadlink hub ale co dál?

Please login or register to see this attachment.

Edited December 5, 2020 by Petramg

[Petramg 0]

On 11/14/2020 at 9:29 AM, 10der said:

can anyone advise? Instructions what to where?

 

 

 

 

Edited December 23, 2020 by Petramg

[Flipoidix 6]

Hi, I just found that for the RM4 mini the temperature and humidity formulas are wrong ( for the hub V1 )

 

for example:

 

Temperature is 20.82º

payload[0x6 + 1] = 20

payload[0x7 + 1] = 82

so the formula should be the first value added to the second divided by 100 ( decimal point )

 

here is the fix:

 

                        --local temp = (payload[0x6 + 1] * 10 + payload[0x7 + 1]) / 10.0

                        local temp = payload[0x6 + 1] + ( payload[0x7 + 1] / 100 )

                        --local humidity = (payload[0x8 + 1] * 10 + payload[0x9 + 1]) / 10.0

                        local humidity = payload[0x8 + 1] + ( payload[0x9 + 1] / 100 )

 

[10der 832]

let me check

[10der 832]

1 hour ago, Flipoidix said:

here is the fix:

i am sorry, you RIGHT!.

 

proofs

 

Please login or register to see this image.

/monthly_2021_01/image.png.afd354a9e5526adb13c98cdb6f399ff2.png" /> 

 

 

 

 

 

Please login or register to see this attachment.

Edited January 1, 2021 by 10der

[10der 832]

able to get data.

Please login or register to see this code.

 

and now 

fibaro.call(1948, "getSensors", "192.168.1.51", 2074)

 

and another QA

 

Please login or register to see this image.

/monthly_2021_01/image.png.e5fb58a9df9f27a179c820d3e098c49c.png" />

 

 

result

 

Please login or register to see this attachment.

 

 

 

 

[Flipoidix 6]

@

Please login or register to see this link.

 

 

How can I get the temperature data from another QA, to a variable without modifying the broadlink hub to do so in the getSensors function? 

 

Also, where can we download the last version?

 

I think it could be possible using child devices to create multiple child QA's when discovered, what do you think?

Discover > finds RM4 with temperature and humidity so it creates 3 QA's ( RM4 IR sender, Temperature and Humidity ) all pointing to the hub to use its functions but as their children

[10der 832]

16 hours ago, Flipoidix said:

How can I get the temperature data from another QA, to a variable without modifying the broadlink hub to do so in the getSensors function? 

as I said before.

just fix my QA with your code (thank for bugfix, AGAIN) and add additional code

 

Please login or register to see this code.

 

than just in YOUR QA add function 

Please login or register to see this code.

 

 

Please login or register to see this attachment.

[Martin Windsmose 4]

Hi 

I am not able to connect to my RM4 Pro. 

I´ll find it on the wireless network, but HC3 wont let me continue without a wifi password. and the encryption is none.

please advice

[Martin Windsmose 4]

Please login or register to see this attachment.

[Martin Windsmose 4]

OK, got the RM4 pro on local network. but then i am stock. 

What should i change in the QA. I tried the IP, MAC etc with out any result.  

[Martin Windsmose 4]

can anyone help.