Alarm dosne't trigger scene.

[tzimber 3]

Hi,

not sure what happened, but my system doesn't seem to respond to alarms.

when device is breached, i do see the alarm on my app, but the scene that should run when alarm is running isn't triggering.

 

Also, i i try to use the fast actors on the alarm panel, it's not doing anything.

for example, i choose several lights to turn on when alarm is triggered, but the alarm state starts and nothing happens.

if i manually run the scene that turn the lights, or the scene that arm some sensors its working fine.

 

this was working perfectly for several years, i have no idea why it stopped.

 

HCL lite

FW:4.600

no errors on the system.

scene marked to run when alarm is running.

* i have cleared consumption history - no change

* i have rebooted the system - no change

 

Any ideas anyone ?

 

thanks !

 

****

When doing some further testing i have some more information.

the scene that I'm doing suppose to turn in lights when alarm is triggered ( this option from the alarm panel isn't working)

 

i crated a scene saying that:

Device Group = = Breached and armed >

than > Device Group = = TURN ON.

 

now,

what I have noticed is that if on the first device group, I'm adding only one sensor, for example 1 motion sensor its working fine.

but if I add 2 or more sensors, it doesn't work.

dose this means that when i chose multiple devices and say " Device Group Breached And Armed " the system is waiting for all devices on this group to be breached and armed to trigger the scene ? 

this was defiantly wasn't the case in the past.

 

dose this mean that now i have to each sensor separately in order to turn on some lights when alarm is triggered ?

Edited December 8, 2020 by tzimber