Roller Shutter 3 Calibration doesn't start

[Neo Andersson 184]

Hey guys,

 

I'm just totally lost here..I have tried like all possible combinations in paramateres, and did everything accirding to the manual...still nothing..

I can't get blinds to start the calibration process..

Here are my correspondent parameters, and a quuick look at my blinds..Did I miss something? What can be the problem here?

Any help?

Also i am trying to get an answer in another topic for "How to determine when the blinds are fully opened/closed" or the other thing "How to determine if blinds are in motion or not", maybe someone reading this topic can answer me both questions...that would be a christmast in the summer...?

Please login or register to see this attachment.

Please login or register to see this attachment.

[jakub.jezek 353]

@Neo Andersson, did you tried calibration button from advanced tab?

[Neo Andersson 184]

Yes, i have tried it.  There must be a bug in roller shutter 3. Not the calibration, but as i mentioned in other topics, the associated remote controller, or walli switch from Aeotec doesnt work on first button 1x press.

 

Please login or register to see this link.

 

I have contacted Aeotec support, and they confirmed me, that their remote controller and walli switch work as intended.

Also i have found some other users to have the same problem with other brands, not only Aeotec.

Fibaro roller shutter has a bug on 1st button 1x press on remote controllers. (press and hold works)

Edited August 31, 2021 by Neo Andersson

[Martin_N 146]

@Neo Andersson

Have you tried the B-button for hw calibration? Right on the module? RS3?
Does manual control work with the buttons connected to the RS3 inputs?

[Neo Andersson 184]

Yes, i have tried the B button. 

What do you mean by manual coontrol? The entire problem is about manual controlling..(Button press)

Opening/closing from PC or APP  is working. Opening/Closing lamels is also working from PC or APP

It doesnt work from the remote button or walli switch button.. as described above

[Martin_N 146]

@Neo Andersson

What type of button for RS3 control do you have connected to terminals S1 and S2?
You write about the switch "walli". The one from Fibaro? It's not entirely clear to me how you have RS3 involved. Can you attach a picture?