Search the Community

In the next version of SolarEdge Monitor the functions of SolarEdge Extra will be integrated. This QuickApp gets extra information from your SolarEdge managed Solar Panels to give you the most insight of your SolarEdge installation. Site Details: Site details, such as name, location, status, etc. Site Overview: Site overview data. Inventory: Inventory of SolarEdge equipment in the site, including inverters/SMIs, batteries, meters, gateways and sensors. Inverter Technical Data: Return specific inverter data for a given timeframe. Site Power: Site power measurements in 15 minutes resolution. Site Energy: Site energy measurements in 15 minutes resolution. Site Environmental Benefits: All environmental benefits based on site energy production: CO2 emissions saved, equivalent trees planted, and light bulbs powered for a day. Use of the monitoring server API is subject to a query limit of 300 requests for a specific account token and a parallel query limit of 300 requests for each specific site ID from the same source IP. The monitoring server API allows up to 3 concurrent API calls from the same source IP. Any additional concurrent calls will return HTTP 429 error – too many requests. See API documentation on https://www.solaredge.com/sites/default/files/se_monitoring_api.pdf Site Details: id – the siteID name – the site name account id – the account this site belongs to status – the site status (see Site Status on page 53) peak power – site peak power currency - e.g. EUR installationDate – site installation date (format: yyyy-MM-DD hh:mm:ss ) ptoDate – permission to operate date notes type – site type location: country state city address secondary address zip time zone alertQuantity - number of open alerts in this site * alertSeverity – the highest alert severity in this site * publicSettings: isPublic - if this site is public (true or false) public name - name * Alert information is only available when using an API_KEY generated by an account. API_KEY generated at the site level does not return this information. Inventory: Inverter name – the inverter name e.g. Inverter 1 manufacturer – manufacturer name (SolarEdge) model name e.g. SE16K Firmware version e.g. 2.52.311 communicationMethod – the communication interface used to connect to server. e.g.: Ethernet or WIFI. serialNumber – the equipment serial number e.g.: 7F123456-00 connectedOptimizers – number of optimizers connected to the inverter Meters name – the inverter name e.g. “FeedInMeter” Manufacturer – e.g. “WattNode” Model – meter model number SN – serial number (if applicable) Type – metertype, e.g. “Production” Firmware Version (if applicable) Connected To – Name of SolarEdge device the meter is connected to connectedSolaredgeDeviceSN – serial number of the inverter/gateway the meter is connected to form – physical for a HW meter or virtual if calculated by arithmetic between other meters Sensors (Irradiance/wind/temperature sensors) connectedSolaredgeDeviceSN – the S/N of the device it is connected to e.g. 12345678-00 Id – e.g. “SensorDirectIrradiance” connectedTo – name of the device it is connected to e.g. “Gateway 1” Category – e.g.IRRADIANCE Type – e.g. “Plane of array irradiance” Gateways name – the inverter name e.g. Inverter 1 serialNumber – the equipment serialnumber e.g. 7F123456-00 Firmwareversion Batteries Name SerialNumber Manufacturer - the battery manufacturer name Model - the battery model name Nameplate capacity - the nameplate capacity of the battery as provided by the manufacturer Firmwareversion ConnectedTo – Name of SolarEdge device the battery is connected to connectedSolaredgeDeviceSN – serial number of the inverter/gateway the battery is connected to Interver Technical data: timestamp AC current (divided per phase) AC voltage (divided per phase) AC frequency (divided per phase) QRef (divided per phase) CosPhi (divided per phase) TotalActivePower apparentPower - Supported starting communication board version 2.474 activePower - Supported starting communication board version 2.474 reactivePower DC voltage groundFaultResistance powerLimit % Lifetime energy - Supported starting communication board version 2.474 totalEnergy temperature - Celsius inverterMode SLEEPING – night mode STARTING – pre-production MPPT – production THROTTLED – Forced power reduction SHUTTING_DOWN – Shutdown procedure FAULT – error mode STANDBY – maintenance LOCKED_STDBY – standby mode lock LOCKED_FIRE_FIGHTERS – firefighters lock mode LOCKED_FORCE_SHUTDOWN – forced shutdown from server LOCKED_COMM_TIMEOUT – communication timeout LOCKED_INV_TRIP – inverter self-lock trip LOCKED_INV_ARC_DETECTED – inverter self-lock on arc detection LOCKED_DG – inverter lock due to DG mode enable LOCKED_PHASE_BALANCER – inverter lock due to phase imbalance (1ph, Australia only) LOCKED_PRE_COMMISSIONING – inverter lock due to pre-commissioning LOCKED_INTERNAL – inverter lock due to an undisclosed internal reason operationMode 0 – On-grid 1 – Operating in off-grid mode using PV or battery 2 - Operating in off-grid mode with generator (e.g. diesel) is present apparentPower - VA (divided per phase) activePower - VA (divided per phase) reactivePower - VAR (divided per phase) cosPhi (divided per phase) vL1ToN - 1ph only vL2ToN - 1ph only vL1To2 - 3ph only vL2To3 - 3ph only vL3To1 - 3ph only Environmental Benefits: CO2 - quantity of CO2 emissions that would have been generated by an equivalent fossil fuel system SO2 - quantity of SO2 emissions that would have been generated by an equivalent fossil fuel system NOX - quantity of NOX emissions that would have been generated by an equivalent fossil fuel system treesPlanted - equivalent planting of new trees for reducing CO2 levels lightBulbs - number of light bulbs that could have been powered by the site for a day Site Power Detailed: timeUnit - the time unit (QUARTER_OF_AN_HOUR) unit - the measurement units (e.g. Watt) type - i.e. Production, Consumption, SelfConsumption, FeedIn (export) or Purchased (import) date - date and time value - power in Watt at that time of the day Site Energy Detailed: timeUnit - the time unit (QUARTER_OF_AN_HOUR) unit - the measurement units (e.g. Wh) type - i.e. Production, Consumption, SelfConsumption, FeedIn (export) or Purchased (import) date - date and time value - power in Wh at that time of the day Overview: id currentPower lastDayData energy lastDayData revenue lastMonthData energy lastMonthData revenue lastYearData energy lastYearData revenue lifeTimeData energy lifeTimeData revenue lastUpdateTime Changes version 0.1 (25th June 2023) - First (development) version Variables (mandatory and created automatically): - siteID = Site ID of your SolarEdge Inverter (see your Inverter Site Details) - apiKey = API key of your SolarEdge Inverter (contact your installer if you don't have one) - serialNumber = Short serialNumer of your SolarEdge Inverter (see your Inverter Inventory Details) - language = Preferred language (default = English (en)) - debugLevel = Number (1=some, 2=few, 3=all, 4=simulation mode) (default = 1)