Welcome to Smart Home Forum by FIBARO
Search the Community
Showing results for tags 'hcl3'.
Hi, I am evaluating using Fibaro Intercom as a main Door Bell. Looking for your thoughts and experience in the pros and cons of Fibaro Intercom in comparison to other IP SIP Doorbells. Mainly, I am looking to understand the advantages of using Fibaro Intercom with Fibaro Home Center 3. Can I for example correlate scenes with the Door Bell? What are additional features that I would get if I use the Fibaro Intercom that I would not get if I use other brands? If anyone is currently using the device, what are your thoughts? How is your setup?
Problem: Cannot add the WALLI Controller device to Home Center Lite 3. Devices Specification: - Home Center Lite 3, YH-001, HCL3-001 (Z-WAVE Plus) - WALLI Controller FGWCEU-201 (Z-WAVE Plus) Examined Steps (following official WALLI Controller documentation): 1) Setting the main Z-Wave Controller to addidng mode. 2) Quickly pressed one of the buttons (response is red light) (I suppose it is the normal button, I didnt notice any hidden button under the cover) 3) Waiting 30 seconds, tryied to press both buttons and on the HCL3 is never any repsonse in logs, the device is not added. Also noticed that 3x quick press + 1 long press leads to green flashing - as well with no any response. Battery was checked and is OK (3.6V). Distance between Controller and HCL3 is 1 meter. Noice: The Walli Controller was already paired to some other device, the device I bought was unpacked and returned to shop, before I bought it. Possibly some reset might be required? Thank you for your help.
I'm struggling with the set up of a power meter and a HC3 Lite. They are the only two components and I just cannot understand what I'm missing. I thought I'd post the issue here before asking support. I've installed a Philio Z-Wave smart energy meter (Philio Z-Wave Smart-Energy-Meter (blackcatcontrolsystems.com.au) and added it into my folks HC3 Lite z wave network. It appears to be reading and publishing the Volts, Amps, Watts, KWh and Power Factor, however: it won't register in the energy panel. The Watt current consumption is registering but only in parts of the app, A historical graph of watt usage will only show in the device's ADVANCE tab in the HC3 Lite interface, but not on the energy panel itself. kWh consumption is not counting. Screenshots attached. I'm not sure if that's enough information for someone better than me to help? Thanks, D