zigbee List of Zigbee devices - users for users

[K.Drozynski 131]

Dear users,

 

We know that you are eager to share your thoughts regarding all Zigbee devices that you have. With so many Zigbee devices available on the market it would extremely difficult to prepare a complete list of supported Zigbee devices which would  include useful remarks.

 

For this reason we would like to encourage you to share your thoughts with other community members - let's make this a list of tested Zigbee devices created by users for users.

 

As correctly pointed out by @petergebruers (kudos to you) "A nice list for Zigbee2MQTT already exists, complete with picture, reset procedure(s) and quirks:

 

Please login or register to see this link.

 

So we can add one of those 2149 devices to our HC3, test its behaviour and report back with a link to the EXACT same device.

It is important to link to the exact same devices as the one you tested because there are many lookalikes..."

 

Regards

 

[szczyku 1]

TuYa SPM02-D2TZ

 

Intelligent energy measurement device.

 

Please login or register to see this link.

 

It is added, but that's all, nothing more can be done with it, no configuration, no parameters.

Please login or register to see this attachment.

Edited January 29, 2024 by szczyku

[szczyku 1]

TONGOU TO-Q-SY2-163JZT

 

Please login or register to see this link.

 

It works as it should, all functions work.

Please login or register to see this attachment.

[tinman 1,070]

"INSTA NEXENTRO Zigbee DALI TW Converter with Power Supply" seems to be working, off status is not always refreshed (or with delay), but communication works.

not i zigbee2mqtt DB

Please login or register to see this link.

Please login or register to see this link.

 

Please login or register to see this image.

/monthly_2024_02/image.png.626b5692960b251177e928eed987092c.png" />

[Whswede 7]

On 4/14/2022 at 7:06 PM, djdark said:

Nous A1Z

Please login or register to see this link.

 

You are able to add but not schowing in list.

You are not likning to Nous A1Z…

 

Correct link would be:

Please login or register to see this link.

 

I added two Nous A1Z and they add just fine and is reporting power (amp+voltage) BUT seems unstable as connection drops after 10-20 minutes. Need to power-cycle to get connection up. Might be a issue with distance between my HC3 and devices. Will test further. Running on HC3 with firmware 5.151.47 beta. 

Edited February 12, 2024 by Whswede

[szczyku 1]

IKEA LED2201G8

 

Please login or register to see this link.

 

Works as it should. You can turn it on and off, change the brightness and color.

[szczyku 1]

IKEA E2201

 

Please login or register to see this link.

 

The device is not detected, so it does not work.

[shinsenai 1]

SONOFF TRVZB Thermostatic Radiator Valve

 

Please login or register to see this link.

 

Can be included without problems, however it is classified as a Relay Switch and exposes only an ON/OFF command (the "state" attribute). OFF works (the valve is switched off), while ON doesn't do anything (the valve remains off), none of the other valve attributes ("local_temperature", etc.) are accessible even using the API directly (except "linkquality"):

 

GET response: {"status":200,"headers":{"Date":"Sat, 17 Feb 2024 11:51:38 GMT","Content-Type":"text\/plain; charset=utf-8","Server":"nginx","Content-Length":"32","Connection":"close"},"data":"{\"state\":\"ON\",\"linkquality\":100}"}

[szczyku 1]

Müller Licht 404021

 

Please login or register to see this link.

 

It works as it should, the device is added to the control panel, you can turn the light off and on.

[MJJ_ADE 2]

W dniu 11.04.2023 o 21:05, yoozef napisał:

Guys, is there ANY zigbee device supported, that could serve as a wireless (battery powered) switch?

 

I know these DON'T work:

Aqara wireless switch WXKG11LM, WXKG13LM, ....

Sonoff SNZB-01

 

Is Fibaro's "the button" the only descent solution?

 

This is not Zigbee but work with no problems: Remotec ZRC-90 Z-Wave Scene Master

[yoozef 4]

Can't find this on zigbee2mqtt site but bought these cheap water detector and single switch on aliexpress and they work perfectly well with Fibaro HC3:

 

Wireless Water Detector/Tuya Zigbee Water Leak Detector/Water Flood Sensor

Model Number: 898EZ

 

Aubess Mini Smart Switch 16A

Model Number: ZN28972502

[sebo 1]

ZBMINIL2 

Please login or register to see this link.

ZBMINIL2 - nie działa  

SNZB-06P  

Please login or register to see this link.

SNZB-06P - działa !

[Guest Jasper Waale]

 

I been looking for a few Items that do not come in Z-wave one is power strips with energy metring water stuff and power meting that cheap and works so most of not all outlets are able to be added 

 

This one DO NOT Work Not even detected I have 2 and both are the same 

Please login or register to see this link.

Please login or register to see this attachment.

 

 

This Do work, but only 3 of the 3 plugs are able to be turned on and off and not by the Zigbee power meter working  

Please login or register to see this link.

 

 

Please login or register to see this attachment.

 

Water controls to run on scripts 

 

This gets added and included, but Missing Configuration and you can't turn it on or off   ( seen same as the different model in all Gray ) 

Please login or register to see this link.

 

Please login or register to see this attachment.

 

 

This works, its includes and read power use and works able to turn off and on, but is not small to point you able to easily hide in the socket Im using for water heard washing machine etc.. not inside the walls

 

Please login or register to see this link.

Please login or register to see this attachment.

 

Edited April 1, 2024 by Jasper Waale

[Raspel 0]

MOES ZigBee Light Switch, Smart Battery Powered, Multi-Control Push Button Scene Switches

- doesn't work, appears as "Not configured" and reports battery 0%

Please login or register to see this attachment.

Please login or register to see this attachment.

[BonCheek 1]

Temperature and humidity sensor OWON THS317

Please login or register to see this link.

 

HC3 build: 5.154.37

This device can be added, but it does not work as expected.

Does not report temperature and humidity. It shows "0" all the time.

[btdix 0]

Please login or register to see this link.

Sonoff switch - does not work.

Device unconfigured.

[JulMey 0]

On 5/28/2022 at 9:53 AM, imparator said:

Blitzwolf BW-SHP15 works great 

Hello,

On my side, I have no electricity consumption information. I see the electricity consumption modules but always with 0 as value.

Did you do a special configuration?

[RobertL 21]

Heiman Smart Fall Detector - ZigBee.

 

Perhaps this could be a good aid for the well-grown age group and especially if it can eventually be supported by HC3 

 

Please login or register to see this attachment.

Edited July 11, 2024 by RobertL

[wojofibaro 6]

W dniu 26.03.2024 o 12:28, sebo napisał:

SNZB-06P  

Please login or register to see this link.

SNZB-06P - działa !

 

Hej, A możesz coś więcej napisać? Jak działa pod fibaro? Wykrywa ruch? Czy potrafi zliczyć ile osób jest w pomieszczeniu?

[DJ6971 1]

Aqara Roller Shader Driver E1 connects to the HC3 hub but identifies itself as a temperature sensor. It's not possible to control this device in any way. If it can be added, that would be great, as many users definitely use this device.

Please login or register to see this link.

 

Please login or register to see this image.

/monthly_2024_07/image.png.cd95ba3cd08ca8c0479c1b0eaf332095.png" />
 

[sebo 1]

W dniu 15.07.2024 o 14:03, wojofibaro napisał:

 

Hej, A możesz coś więcej napisać? Jak działa pod fibaro? Wykrywa ruch? Czy potrafi zliczyć ile osób jest w pomieszczeniu?

siema, SNZB-06P - wykrywa ruch i czuje że ktoś siedzi przy kompie a po opuszczeniu pomieszczenia przechodzi w stan nieobecność i wyłącza np. swiatło. tylko takie proste działanie ale do pomieszczenia dziecka kiedy siedzi przy np kompie jest ok