About This File
🧠 What AOQ (All-in-One QuickApp) Offers
- Multi-System Control: Seamlessly manages HC3, HC2, and HCL controllers using master/slave architecture.
- Unified Automation: Replaces scattered Lua and Block scenes with one centralized QA.
- Device Intelligence: Auto-detects Z-Wave, ZigBee, Nice, QA devices, and scenes.
- Alarm Zone Management: Identifies breached zones/sensors and triggers actions.
- Custom Events & Profiles: Supports dynamic profiles and custom rule-based automation.
🛠️ Core Configuration: Job Management - jM{} Hash Table
Each line in jM{} includes:
| Field |
Description |
|
|---|---|---|
| Time Span |
Duration in minutes for monitoring or action. |
|
| IDs List |
Devices/scenes/variables/keywords (e.g., `"137,630" |
|
| Criteria & Rules |
Optional conditions like |
|
| Action Tables |
Optional commands: |
🔄 Device Aliasing with jS2n{}
Avoid hardcoding device IDs:
jS2n = {mSensor=200, boiler=137, dryer=630, light=230, timeScene="_17"}
Use aliases in jM{}:
jM={
{15,"`mSensor`",{state="value=true", trueAct={"`light`", "turnOn"},falseAct={"`light`", "turnOff"}}}
}
🔍 Monitor Option
Detects inactivity or failure to report:
{8, "`timeScene` and _545", {timeSlot="10:00~22:00"}} -- scenes must be active every 8 min between 10am to 22pm
{10, "`boiler`and 145", {property="power"}} -- must report power every 10 min
{30, "`boiler`", {state="power>100"}} -- alert if power >100 for 30 min
⚙️ Control Option
Example: Turn on light when motion sensor is breached, turn off after 3 min when motion sensor back to safe:
jM={"`mSensor`",{state="value=true",trueAct={"`lightSw`","turnOn"},falseAct={"`lightSw`","turnOff", "180"}}}
To restrict to nighttime:
jM={"`mSensor`",{state="value=true",timeslot="18:00~07:00", trueAct={"`lightSw`","turnOn"},falseAct={"`lightSw`","turnOff", "180"}}}
Example: Turn on light when motion sensor is breached, turn off after 3 min (regardless of when motion sensor back to safe)
jM={"`mSensor`",{state="value=true", trueAct={{"`lightSw`","turnOn"},{"`lightSw`","turnOff", "180"}}}}
🧪 Debug & Table View
- Debugger Output: Shows executed commands with color-coded status.
- Table Header: Displays system info, sunrise/sunset, home/vacation mode, system traffic.
-
Columns:
- Device type, ID, name, battery status
- Criteria evaluation
- Alerts and elapsed time
- Action tables and active rules
📊 Top Active Monitor (New) AOQ now includes an enhanced Top Active Devices monitor designed to identify devices that may destabilize HC3 performance.
It analyzes lifetime activity, current load per hour, and burst behavior to detect devices generating excessive or abnormal traffic.
The table highlights devices that may cause delays, radio congestion, disconnects, or even controller restarts.
A Peak/h column appears only when abnormal bursts are detected, helping users quickly locate problematic devices without cluttering the interface.
📘 Want to Go Deeper?
You can find the full documentation and guides on the Smart Home Forum by FIBARO, including:
- AOQ Advanced User’s Guide
- AOQ Quick Guide
- AOQ HC-WebEye Viewer
Edited by cag014
Updated
What's New in Version 1.2 See changelog
Released
New feature:
- added ability to use global variables of other Quick Applications. format is &<QA-ID><varName> (e.g. &78myVar)
- added option to verify states, status of any item in the system after command execution. Verification format is the same as conditional statement format(e.g. {0,"`wTemp`",{state="value<25",trueAct={"`wHeater`","turnOn!{`wHeater`:energy>700}",""}}},
- added errAct{} array to execute command(s) if verification failed. (e.g.
{0,"`temp`",{state="value<25",trueAct={"`Heater`","turnOn!{`Heater`:energy>700}",""},errAct={"State Error","sendEmail","Heater doesn’t turned ON"}}},
-
added verify! command, recommended to define errAct{} table to execute commands in case verification failed, otherwise warning displayed in debug window and in hcWebEye table.
{0,"`temp`",{state="value<25",trueAct={"","verify!{`heater`:energy>700}",""},errAct={{"State Err","sendEmail","Heater doesn’t turned ON"},{"`heater`","turnOff",""}}}},
- added prefix to every displayed command to indicate executed table belonging
Note:
- While updating new version, please save your tables before (from line 1 up to line --== SAVE ABOVE SECTION BEFORE UPDATE ==)
- HC2 users migrated to HC3 and have used All-in-One Scene, just copy your jM{} and jS2n{} arrays, change device IDs and you're ready to go.
