Tutorial: Single scene instance / Event model

[Sjakie 135]

Hello Jan,

B5 supervisor with B46 ER

B5 stops without error message and two minutes later it runs again further no error messag

see below for B5 & B52

 

Please login or register to see this image.

/monthly_2019_05/image.png.5078bf14c065e3b36f9fbe079653defc.png" alt="image.png.5078bf14c065e3b36f9fbe079653defc.png" />

 

B5 & B52

runs but (in between white and green  lines ) no error message

8.19.40 restart
8.19.56 slow mailbox
8.20.04 restart
8.20.15 slow mailbox
8.21.06 slow mailbox
8.21.08 restart
8.21.19 slow mailbox
8.21.25 slow mailbox
sreen refresh
8.22.25 slow mailbox
8.22.34 slow mailbox
8.22.35 restart
8.22.50 slow mailbox
8.23.12 restart

 

If it helps you to find the cause, solution more info you may log in remote if you want. Just keep the house under alarm. We are away today

 

[jompa68 121]

55 minutes ago, jompa68 said:

Working 

 

Please login or register to see this link.

 

Did remote event.post on restart scene, did notify to often. 
Why does scenes restart so many times?

[jgab 1,968]

3 hours ago, jompa68 said:

Did remote event.post on restart scene, did notify to often. 
Why does scenes restart so many times?

 

Well, scenes are restarted if they don't answer 'PONG' on a 'PING' from the Supervisor.

Do you see that your scenes are restarted too often? On my side it runs smoothly - but I only have 4 ER scenes at the moment.

I have pushed a new version of Supervisor with better debugging. (B6). Try that. ( @Sjakietoo)

If you do see a lot of restarts try to set PINGTIMEOUT='+/00:00:20" and maybe POLLINTERVAL = "+/00:01" to trigger the PING more often so it's easier to watch.

 

Edited May 30, 2019 by jgab

[jgab 1,968]

5 hours ago, jompa68 said:

 

 

Sorry, pushed yet another version of Supervisor (B7).

When the Supervisor gets a PONG back it will log the time it took " (resp:Xs)"

If that response time starts to get close to PINGTIMEOUT you need to increase the PINGTIMEOUT

I have set PINGTIMEOUT to 20s now as default ( "+/00:00:20").

I also removed an annoying log when the ER Log DB was printed out at start.

[jompa68 121]

1 hour ago, jgab said:

On my side it runs smoothly - but I only have 4 ER scenes at the moment.

i did reduce my to 5 now and it runs much smoother now.

[jgab 1,968]

I pushed a new helper scene, iCal.lua. (same subdirectories as Supervisor.lua)

It fetches calendar events from google calendar or apple (iCloud) calendar.

The ical parsing is based on @jcichon01 google calendar scene., credits in scene.

 

The way to use it is from any scene.

Subscribe to a calendar and provide a name. You can subscribe to many calendars.

You will receive #calendar events back when the calendar event is starting and when it is stopping.

In the example below I put a EventScript command (something that starts with a '%') in the description field of the calendar event and execute it - but you could do other stuff.

Please login or register to see this code.

 

Edited August 8, 2019 by jgab

[Sjakie 135]

Hello Jan,

B7 stops all scenes

Remark ER B46 scenes are on manually start, I dont want to trow away

Pingtime out is as default00:00:20

PollingInterval 00:00:01

Please login or register to see this attachment.

remark ER

[jgab 1,968]

35 minutes ago, Sjakie said:

Hello Jan,

B7 stops all scenes

Remark ER B46 scenes are on manually start, I dont want to trow away

Pingtime out is as default00:00:20

PollingInterval 00:00:01

Please login or register to see this attachment.

remark ER

 

You mean that POLLINTERVAL is  "+/00:01" (i.e. 1 minute) I hope.

In the screenshot/log, did you get the "Scene not answering - restarting scene!" messages for the scenes earlier?

 

In any case, your log looks really strange, no scene seems to report back in time (20s) and sometimes the Supervisor doesn't react until after 30s... the only way this makes sense is if your system is terrible overloaded...

Do this:

Please login or register to see this code.

We are increasing the intervalls a lot to see if everything is just running slow. (Have you rebooted your box lately?)

[Sjakie 135]

Hallo Jan,

Sorry for the typo

local POLLINTERVAL = "+/00:05"    -- poll every 3 minute
  local PINGTIMEOUT = "+/00:02:00"  -- No answer in 10s, scene will be restarted
  local STARTUPDELAY = "+/00:00:40" -- Time for scene to startup after a restart before pinging starts again
  local MAXRESTARTS = 2             -- Number of failed restarts before disabling t

All scenes are back on manual after I put them on automatic.

Only supervisor is running

Box rebooted  today after being stucked by an alarm

Box runs at 0-20%

[Sjakie 135]

Hello Jan,

All scenes stopped and on manual

Supervisor B7, it scipped 2 minutes while load was not high

ER B54

I have no clue

 

 

Please login or register to see this image.

/monthly_2019_05/image.png.62725830fe80ba008edc37df83029f24.png" alt="image.png.62725830fe80ba008edc37df83029f24.png" />

[jompa68 121]

5 hours ago, jgab said:

I pushed a new helper scene, iCal.lua. (same subdirectories as Supervisor.lua)

It fetches calendar events from google calendar or apple (iCloud) calendar.

The ical parsing is based on @jcichon01 google calendar scene., credits in scene.

 

The way to use it is from any scene.

Subscribe to a calendar and provide a name. You can subscribe to many calendars.

You will receive #calendar events back when the calendar event is starting and when it is stopping.

In the example below I put a EventScript command (something that starts with a '%') in the description field of the calendar event and execute it - but you could do other stuff.

Please login or register to see this code.

 

Should code above be placed in iCal.lua or another scene?

[Sjakie 135]

hello,

just an idea to do: I have a flag outside with a light spot on. Idea change the light bulb into hue color.

If switched on changing every 5 minutes the color

How to do?

With my knowledge I will fill an a3 paper with rules guess it should be able to short it

I used the wait but that is not give the good result

Rule.eval("@20:27  =>  woonkamer.lampplafondklokzijde:on ; wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=0, transitiontime=2, col=75} ,wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=62, transitiontime=2, col=150} ; wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=124, transitiontime=2, col=75}; wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=186, transitiontime=2, col=75} ; wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=255, transitiontime=2, col=75}")

Or do I overload HC2, supervisor or all?
Please advice

 

 

 

 

[jgab 1,968]

3 hours ago, jompa68 said:

Should code above be placed in iCal.lua or another scene?

it should be placed in another scene. The idea is that iCal should not need to be touched. All parameters come from other scenes subscribing to calendars.

I would like to change iOSLocator to this model too.

2 hours ago, Sjakie said:

hello,

just an idea to do: I have a flag outside with a light spot on. Idea change the light bulb into hue color.

If switched on changing every 5 minutes the color

How to do?

With my knowledge I will fill an a3 paper with rules guess it should be able to short it

I used the wait but that is not give the good result

Rule.eval("@20:27  =>  woonkamer.lampplafondklokzijde:on ; wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=0, transitiontime=2, col=75} ,wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=62, transitiontime=2, col=150} ; wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=124, transitiontime=2, col=75}; wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=186, transitiontime=2, col=75} ; wait(00:00:15) ; woonkamer.lampplafondklokzijde:value={bri=125, hue=50, sat=255, transitiontime=2, col=75}")

Or do I overload HC2, supervisor or all?
Please advice

 

No, it's pretty simple. I post an example tomorrow morning.

/J

[jompa68 121]

6 hours ago, jgab said:

it should be placed in another scene. The idea is that iCal should not need to be touched. All parameters come from other scenes subscribing to calendars.

I would like to change iOSLocator to this model too.

Ok, just wanna confirm that i was thinking right. But for me it is not working, i have setup iCloud calendar and set it to public, when will scene fetch the data, every minute?

Does it have some debug flag to turn on?

[Sjakie 135]

hello Jan,

6.00 start 3 scenes ERB54 and SupervisorB7

6.02.48 Restart scene Begane grond

6.02.56 Supervisor freeze?

6.05.46 Supervisor continuing giving green lines, no restart

6.07.57 Supervisor freeze?

All 3 scenes still running

6.10.46 Supervisor continuing giving green lines, no restart

6.10.53 Supervisor freeze?

612.52 restart scene Woonkamer

6.13.01Supervisor freeze?

Running 3 scenes, supervisor, 7 GV, 2 lua scenes if a relais is on/off

please advice

Please login or register to see this image.

/monthly_2019_05/image.png.d5dc37c211be40b09adf83e49caf379c.png" alt="image.png.d5dc37c211be40b09adf83e49caf379c.png" />

[jompa68 121]

@Sjakie your CPU load looks really high. My average is around 30% during 5min.
I run 6 ER scenes now without any problems. Could it be some other problems? Earlier i did see some picture from your post that deviceID in your HC2 was high, more than 1500 or so. Perhaps the database is corrupt?
Perhaps you should create a ticket to fibaro support to see if they find some strange setup of your box

[Sjakie 135]

6.23.03 Supervisor freeze

6.24.00 start 4th scene

6.26.44 restart 4th scene scen was NOT stopped

6.30.39 start 5th scene

supervisor freezes 2 minutes

6.33.47 start 6th scene

 

 

 

Please login or register to see this image.

/monthly_2019_05/image.png.5479b23a5ce8ac2f9941a1705702b9f2.png" alt="image.png.5479b23a5ce8ac2f9941a1705702b9f2.png" />

 

Hi Jompa,

Device ID looks normal

[Sjakie 135]

with scenes I am in 1500

[Sjakie 135]

07.10 Scene woonkamer is generating the most traffic>>> switched off

          All older scenes of ER deleted ( I dont think they will consume but supervisor will ping them)

          I watched it 5 minutes and the picture looks very nice

         Sometimes a peak 70%

Supervisor is still missing sometimes 1-2 minutes with this low load

Please login or register to see this image.

/monthly_2019_05/image.png.e556f9d7868d5b387fb6a1677e1bc1fe.png" alt="image.png.e556f9d7868d5b387fb6a1677e1bc1fe.png" />

where this comes from I cant find

[jgab 1,968]

3 hours ago, jompa68 said:

Ok, just wanna confirm that i was thinking right. But for me it is not working, i have setup iCloud calendar and set it to public, when will scene fetch the data, every minute?

Does it have some debug flag to turn on?

 

No, it fetches data every 30min, and when it starts up. 

I have pushed a new version of iCal.lua (B2) with some more debugs.

At the end of main() there is the lines

Please login or register to see this code.

uncomment and add your URLs and run in emulator to see what happens.

Probably should add a forceUpdate command.