Jump to content

Welcome to Smart Home Forum by FIBARO

Dear Guest,

 

as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.

 

As a member you can:

  •     Start new topics and reply to others
  •     Follow topics and users to get email updates
  •     Get your own profile page and make new friends
  •     Send personal messages
  •     ... and learn a lot about our system!

 

Regards,

Smart Home Forum by FIBARO Team


Virtual Devices

The category contains virtual devices submitted by users.
Downloading and submission terms have to be accepted.
Types of files accepted: LUA, VFIB, ZIP, TAR, RAR, JSON.
Virtual devices have to be described properly, screen shots are optional.
Support topics are created automatically here Virtual devices
Report topics and files that are no longer supported by authors.
All the files submitted have to be approved by administrators.

84 files

  1. Advanced Radiation Monitor (ARM) VD standalone

    IMPORTANT NOTICE!
    This VD is currently not working since  [email protected] website has changed their map. All users that installed this VD please DELETE it or at least DISABLE it since it can produce some problems on your HC2. Sorry for the inconvenience.
     
    INTRODUCTION
    ARM VD collects radiation levels from all available stations around the world and shows 5 nearest stations to your location and one station with highest reading. It is using map of radiation detector stations on [email protected] website. [email protected] is a Polish science project using the distributed computing capabilities of the BOINC platform. The main goal of the project is to create a free and continuously updated map of radiation levels available for everyone, by gathering information about gamma radiation using sensors connected to the computers of volunteers willing to participate in the project. Project is completely non-commercial, participating will be free of charge (excluding cost of detector) and the software will be licensed under the GNU General Public License (GPL).
      PREREQUISITES Fibaro Home Center 2 with firmware 4.120 or greater  
    FEATURES
    ARM VD collects radiation levels from all available stations around the world and shows 5 nearest stations to your location and one station with highest readings Simple installation and setup. Uses Developer HERE Geocode API freemium plan to show radiation monitor station location, nearest city name and country. Multi-language support with 27 languages included. Easy setup for VD icons (on UHASTM compatible version is this even easier) Global variables are automatically added, monitored and repaired.  
    INSTALLATION
    Please check provided User Manual where all steps are explained in detail
     
    PACKAGE CONTENT
    Advanced Radiation Monitor VD v2.2 standalone Colorful icon pack User Manual v1.2 EN  
    CREDITS
    Many thanks to BodyArt and gucio1234 from Fibaro forum for help with coding, testing, translations and user manual and andre from http://forum.lic.pl for the original idea.
     
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the ARM VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
    VERSION HISTORY
    2.2 – Corrected bug that was stopping code on error if HERE service does not send city name for the location provided by VD.
    2.1 – Replaced Google location service to get nearest city name and country and introduced HERE service. Also moved code for getting country and city name for location of the station from scene to Update button on VD.
    2.0 – Completely revamped ARM VD to show five nearest radiation measuring stations and the one with highest measuring. Also introduced Google service to retrieve nearest city name and country for the station location provided.
     
    Here is look of the ARM VD:
     

     
    Enjoy coding and your new ARM virtual device! 
    Sankotronic  

    199 downloads

       (0 reviews)

    6 comments

    Updated

  2. UHAS (Universal Home Automation System) for HC2

    UHAS v1.0 (Universal Home Automation System)
     
    KNOWN ISSUES (10/10/2022)
    Global variable HomeTable - before installation please check if you use global variable with this name and if it is used for the purpose of storing devices and scenes ID's as described hereor you use it for another purpose and it is predefined type of global variable. If it is of predefined type, then you will get error when running some UHAS scenes: [DEBUG] 10:53:08: 2022-10-09 10:53:08.283834 [ fatal] Unknown exception: /usr/share/lua/5.2/json/decode/util.lua:35: unexpected character @ character: 1 0:1 [V] line: [DEBUG] 10:53:08: V where letter "V" as in above example is first letter of the current value stored in this global variable. Solution is then to change name of this global variable in UHAS scenes to the name of the global variable that you use for the above purpose or if you do not use such solution then to add comment dashes in front of the code line that reads HomeTable global variable:
    local HomeTableName="HomeTable" <--- change name here -- local jT={}if fibaro:getGlobalValue(HomeTableName)~=nil then jT=json.decode(fibaro:getGlobalValue(HomeTableName))end ↑ -- or add comment dashes here to avoid errors Thanks to @jgab and other users some bugs and typos where found in some of the UHAS scenes. If you downloaded UHAS v1.0 installation package then please download corrected scenes from here: If ALC Config VD fails to find all lights on your HC2 and label ? All shows [0/0] found lights then probably there is a light without actions that are needed for light to be recognised and there is a bug that stops code with error. In that case please download corrected code for button  and paste it over existing one. Download this code from here:   
    UHAS INTRODUCTION
    UHAS is a set of scenes and Virtual Devices (VD) that provide the following capabilities:
    Auto translation of all scenes, VD's, predefined global variables, and messages to 31 different languages (19 directly supported by HC2) (NOTE – not all languages are translated, and users are very welcomed to help with translations that are not yet done) Scheduled and repeating events based on time of day, week, month, and season including Scene FTBE which provides repeating and scheduled actions Advanced Notification Center (ANC) brings centralized notifications with support for most popular services like Pushover, Telegram, GroupMe, WhatsApp and Signal, Sonos TTS and LaMetric TIME smart clock notifications Advanced Lighting Control (ALC) with integration for Philips HUE, Nanoleaf and LIFX
    Very Smart Blinds (VSB) automation
    Presence monitoring and control with geofencing
    Weather state and forecast with notifications and integration for Netatmo weather station and WeatherFlow and Tempest weather stations
    Home consumption monitoring and recording
    Appliance monitoring - with notifications
    Safety alarms fire and flood
    Security alarm integration ready with provided global variables
    Irrigation control based on FIBARO devices
    Scenes ready to use with Fibaro dimmer 2, Fibaro keyFob, Fibaro Swipe, Fibaro Button and Remotec ZRC-90 central scene activation with built in support for ANC
    HC2 system status notifications, automatic backups and many more...
     
    UHAS OVERVIEW
    UHAS has been developed for the Fibaro Home Centre 2 (HC2) home automation controller, as a series of modules, which are responsible for one particular action or job, and the user can interact with them as a group, or on their own. UHAS provides an advanced Home Automation (HA) set of features, ready to be used out of the box with minimum user effort to set up and run. Running code is provided as part of the system, doing most of the settings for the user or a systems installer. UHAS is primarily intended to be used by users of the Fibaro HC2 system who wish to have fully featured HA without the need to learn LUA programming and spending a lot of time with coding Virtual Devices and scenes. UHAS can also become a part of a mature Fibaro system installation which has developed with many modules to cover more advanced HA and more devices. UHAS Virtual Devices and scenes use proprietary code developed by author. This code is developed to minimise users involvement in installation and setting of the system. Most of the necessary setting is done by the UHAS components and other settings are simplified and minimised as much as possible. This was also possible because all UHAS VD's and scenes use role system that is used to find necessary components for actions to be performed. UHAS Virtual devices category is set automatically during translation or changing of the main icon. This means that most of the VD's should show in proper category in new mobile app as lights, blinds, gates, ambience, climate, safety, security, multimedia, remotes and other. The same goes for scenes, when scenes save their settings after first manual run then also category is set.  
    UHAS PREREQUISITES
    Fibaro Home Center 2 (HC2) with firmware version 4.120 or higher.
    Configured and installed z-wave devices – I.e., light switches, motion sensors, lux detectors etc.
     
    INSTALLATION AND UPGRADE
    Please first download provided UHAS Installation and User Manual (12.3Mb) NOTE - UHAS uses its own unique global code variables. This means that UHAS will NOT influence the current system scenes, scripts, or virtual devices in any way, even if any of Sankotronic’s earlier UHAS beta versions and standalone scenes or VD's (Virtual Devices) are being used. There is no need for any changes to be made to the existing code before the installation of UHAS. The UHAS global variables are created and controlled automatically by the system so that you do not need to maintain them manually.  
    PACKAGE CONTENT (25.7Mb)
    86 Virtual Devices 48 scenes Icon sets for all the above VD's and scenes  
    THANK YOU! ❤️
    I want to BIG thank to @clowg for helping me with translations and writing manual these last days speeding up publishing UHAS.
    BIG thank to @gucio1234 and his son Cyprian for making logo for UHAS and 3D printed with real gears! I just love it ❤️

    I also want to thank many of you who helped during testing of UHAS beta versions and with translations! @clowg, @Bodyart, @jimicr, @gucio1234, @jompa68, @Sjekke, @robw, @rbhun, @lennypenny, @FunkFib, @MarcoT, @Orgli, @MarcoTorino71 and many others. Your help is greatly appreciated ?. Apologies to all other not mentioned nice people who contributed in making UHAS.
    I also want to thank gurus of this forum @petergebruers, @jgab, @cag014, @SmartHomeEddy and others for help with coding in LUA.
    And of course a BIG thank to Fibaro for providing Home Center 2 and Home Center 3 for developing purposes!
     
     
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the UHAS. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
     

    659 downloads

       (1 review)

    3 comments

    Updated

  3. LOQED Touch Smart Lock Virtual Device for FIBARO Home Center 2

    What features does the LOQED Touch Smart Lock offer with Fibaro?
    The LOQED Touch Smart Lock & Fibaro integration is done via the local bridge API.
    Currently, the following functionalities are supported:
    Send real-time status changes of the lock (open, unlock, lock) and battery, Wi-Fi, Bluetooth state to the Fibaro HC2 gateway.
    Receive commands from the Fibaro HC2 gateway to change the lock state (open, unlock, lock).
    Only English language supported, however you can edit the VD code to add your own language.
    Currently this VD can’t decode json data POSTed by the bridge, as FIBARO API simply ignores any unknown data and accept only JSON key args:[{}]. Therefore, one can’t decode who opened/closed the LOQED via App (or if it was manually, with knob).
    Security consideration: the LOQED bridge sends any status change (e.g. "the door was opened") to Fibaro over an unsecure HTTP connection in your Wi-Fi network. There is no way to add digital signature (like used by LOQED QuickApp on e.g. Home Center 3) into the Home Center 2 VD. Note that this does not affect opening/locking the door, it is only concerns the status information.
    Requirements
    A supported gateway, such as:
    Fibaro Home Center 2
     
    Installation
    Step 1: create API key
    Go to https://app.loqed.com/API-Config and log in with your LOQED app e-mail address and password (note that you will be logged out of the LOQED app). Click on the “API Configuration tool" button. Click the “Add new API key” button. Set any name and create the API key. It is normal the “Remove unlocking/locking checkbox is greyed out.
    After the key is created, click on the "view / edit" button. Leave this screen open.
     
    Step 2: Install the Loqed VD on the Fibaro HC2 gateway
    Login into your Fibaro gateway.
    Download the VD, unzip the content, go to "Devices" -> "Add or Remove Device"->"Import virtual device" and click "select file".
    Select the "LOQED.vfib" file and upload it.

    Once uploaded, few things need to be set in the VD, go to advanced tab of the VD:
    enter the LOQED Bridge IP Address into the VD "IP Address" field enter 80 for the VD "TCP Port" field

      in each every Button (Lock, Unlock and Open) code window, change these two variables: local loqed_key_id = 0 local loqed_key = 'TE9RRUQgVkQgdi4wMSBmb3IgSG9tZSBDZW50ZXIgMiAoYykgdGlubWFu' to the values from the LOQED API Config website
      loqed_key_id is LOQED API Config -> "API Keys (incoming webhooks)" -> "Local Key ID"
    loqed_key is LOQED API Config -> "API Keys (incoming webhooks)" -> "Key"

     
    Save the VD.

    You should get now some values displayed in the VD,



    if this is working please change the loop value in VD mail loop window to something like e.g. 10 minutes 
     
    fibaro:sleep(1000*60*10)
    instead of the 10 seconds
     
    fibaro:sleep(1000*10)
    which are fine for test, but not daily use.


     
     
    Step 3: Setup Variables on the Fibaro HC2 gateway
    Go to "Panels" -> "Variables Panel"
    Scroll down to "Predefined variables"
    Click on "Add"
    For variable name use "LOQED"
    Add two extra values, you need totally 4 of them
    For the values use following values:
    open unlocked locked unknown

      Click on save.

    Later, you will be able to run your own block and LUA scenes, based on the LOQED variable values.
     
    Step 4: Create webhook scenes on the Fibaro HC2 gateway
    Go to scenes, and click on create -> new -> LUA
    You need totally 4 scenes, the scene name does not matter, the scene ID is only important (for LOQED webhook).
    For the vd_id please use the LOQED VD device ID, which you previously wrote down.

    for "Open State" scene
    --[[ %% properties %% events %% globals --]] -- change the xxx below to the LOQED VD ID on your HC2 local vd_id = xxx fibaro:call(vd_id, "setProperty", "ui.LabelStatus.value", "Open") fibaro:setGlobal("LOQED", "open")
    for "Locked State" scene
    --[[ %% properties %% events %% globals --]] -- change the xxx below to the LOQED VD ID on your HC2 local vd_id = xxx fibaro:call(vd_id, "setProperty", "ui.LabelStatus.value", "Locked") fibaro:setGlobal("LOQED", "locked")
    for "Unlocked State" scnene
    --[[ %% properties %% events %% globals --]] -- change the xxx below to the LOQED VD ID on your HC2 local vd_id = xxx fibaro:call(vd_id, "setProperty", "ui.LabelStatus.value", "Unlocked") fibaro:setGlobal("LOQED", "unlocked")
    for "Unknwon Position" scene
    --[[ %% properties %% events %% globals --]] -- change the xxx below to the LOQED VD ID on your HC2 local vd_id = xxx fibaro:call(vd_id, "setProperty", "ui.LabelStatus.value", "Unknown position") fibaro:setGlobal("LOQED", "unknown")
    Write down the scene IDs, you will need them in Step 7
     
    Step 5: Test VD / Scenes
    Go to "Your Home" on your HC2 webpage, to be able to see the VD and scenes together.

     

    Clicking on the Open, Unlock and Lock buttons of the VD should controll your LOQED Lock, additionally you should see in the VD "Lock state" label some messages,
    e.g. when you click on "Unlock" the status will be "Unlock clicked" right after you clicked, and "Unlock executed" right after your LOQED Lock recieved that command.
     
    Executing (simply manually click on start) of the 4 scenes, should change the VD "Lock state" label to "open", "locked", "unlocked" and "unknown position".
    If all these tests are successful, you can continue with the next step.
     
    Step 6: Create a user and set access permissions on the Fibaro HC2 gateway
    Go to Settings->Access Control
    Create new local user, e.g. loqed
    Setup password for the user, please don't use any special characters


    Change the user Access Control rights, give the user full access to the LOQED VD and these 4 LUA webhook scenes

     

     
     
    Step 7: Create webhooks on LOQED bridge
    The LOQED bridge can send any status change of the lock to your gateway as soon as they happen. For this, you need to set some URL's on the LOQED Bridge.
     
    You need to create 4 webhooks on the LOQED Bridge to inform the gateway about the 4 different lock statuses.
     
    Go to https://app.loqed.com/API-Config --> "Outgoing Webhooks via LOQED Bridge" --> click the button "Add/delete webhooks".
    On that page, add the following URLs:

    http://gw_user:[email protected]_ip/api/scenes/123/action/start
    (only for the night lock trigger, change the 123 to the ID of the "Locked State" scene)

    http://gw_user:[email protected]_ip/api/scenes/124/action/start
    (only for the latch trigger, change the 124 to the ID of the "Unlocked State" scene)

    http://gw_user:[email protected]_ip/api/scenes/125/action/start
    (only for the open trigger, change the 125 to the ID of the "Open State" scene)
     
    http://gw_user:[email protected]_ip/api/scenes/126/action/start
    (only for the unknown state trigger, change the 126 to the ID of the "Unknwon Position" scene)
     
    Above, "gw_user" and "gw_password" is your gateway's username and password created in previous step, "gw_ip" is the IP of ypur Home Center 2
     

     
     
    Done
     
    That's it! You can now control your LOQED Touch using Fibaro Home Center 2.
     

     
     
    Questions?
    If you have any questions regarding this VD, comments or improvements requests, please send me PM
     
    tinman
     
     
     
     

    12 downloads

       (0 reviews)

    0 comments

    Updated

  4. Irrigation Control standalone

    Irrigation Control standalone
     
    INTRODUCTION Finally a solution that brings seamless and easy Irrigation control to HC2. This solution overrides all limitations of the HC2 sprinklers panel. With this solution it is possible to set watering duration up to 100 minutes. Also no more overlapping zone watering times. Adjustment of watering is done according to current and forecast weather and rain amount and then zone watering start times automatically adjusted so there is no more overlapping and pressure drops in the system. Your beautiful garden will stay beautiful with this solution  
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.600 or greater with devices added to the Sprinklers panel
    Sankotronic Lab Weather State & Forecast suite v2.8.1 or greater
    Sankotronic lab Netatmo Weather Station suite v3.3.1 or Netatmo Public Weather Station suite v1.0
     
    FEATURES
    Watering delays and duration adjustment - Works with Weather State & Forecast suite and 6 most popular weather services on the planet to automatically adjust or delay watering depending on current and forecast temperatures and rain precipitation Irrigation pump control – If irrigation system has water supply pump then user can setup pump device ID and irrigation control will take care to start pump before watering cycle starts and stop pump when watering cycle is finished. Sprinklers panel - Works with HC2 Sprinklers panel and overrides panel limitations of 15 minutes watering duration and eliminates overlapping of watering zones by recalculating and setting of zones watering start times depending on adjusted watering duration times. From version 1.2 it is also possible to setup each zone watering start times manually to overlap them and shorten time needed for watering cycle. Watering cycles - User can setup any number of watering cycles with VD and then save them to sprinklers panel with one press of the button. Cycle watering start time and zones watering duration and weekdays all can be setup with this VD and then transferred to sprinkler panel. Auto and Off mode - User can set all watering zones to auto or off mode at once with press of a button Manual watering - User can activate any selected watering zone manually with preselected duration. Great option for maintenance and check of the sprinklers. Watering state at a glance - VD icon shows current overall status of the watering system by changing VD main icon and label accordingly. Watering history – VD is recording all watering cycles times and durations per zones and weather state and forecast measurements. Separate VD is provided for displaying history data. Multi-language support - VD has built in multi-language support with 27 languages included (see APPENDIX 1 for the list). VD can use HC selected language or user can select any other available language. E-mail and push messages are also translated
    VD Icons setup - Easy setup for VD icons. User can download HC2 Icon Preview VD to easily
    find icon ID numbers
    Global variables - are automatically added, monitored, repaired and cleaned and does not require user intervention  
    INSTALLATION
    Please check provided User Manual
     
    UPGRADE
    Since v1.2 has a new VD layout to upgrade, first delete Irrigation Control VD and remove global variable "IrrigationMain_XX" where XX is ID of the old VD and then import new Irrigation Control VD. Irrigation History VD v1.0 can remain installed and users do not have to replace it.
     
    PACKAGE CONTENT
    Irrigation Control VD v1.2 Irrigation History VD v1.1 Icon packs User manual EN v1.2  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the ABC VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
    VERSION HISTORY
    1.0 - First public release 1.2 - please see change log for detailed list of changes  
      Look and feel:
     
    Enjoy coding and your new Irrigation Control! 
    Sankotronic
     
     
     

    234 downloads

       (1 review)

    11 comments

    Updated

  5. CO_MANAGER

    https://github.com/litepl/fibaro-heating-vd
     
    Heating solution VD, based on Danfoss's thermostats and temperature sensors.

    13 downloads

       (0 reviews)

    0 comments

    Submitted

  6. Weather State & Forecast suite standalone

    Weather State & Forecast suite standalone
     
    UPDATED USER MANUAL (09/10/2021)
    I have updated user manual and added chapter 6.4 Weather Forecast global variable and how to read it
    In this chapter users can find how to get forecast data and use this data in their code.
    Please click on this link to download user manual:  SA WS VD and WF VD User manual v2.3EN.pdf
     
    UPGRADE PROBLEM?
    Please check upgrade instructions in User manual or below in version history.
     
    INTRODUCTION
    Weather state & forecast module enhance HC2 weather capabilities. Weather State & Forecast module in its latest version works with five most popular weather services:
    OpenWeatherMap Accu Weather NEW WeatherBit Weather HERE Weather API NEW Weather Underground NEW Weather Underground PWS  
    bringing completely new level of weather experience to Fibaro Home Center 2 users.
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.160 or greater with installed Weather provider plugin set as main weather provider.
    Sankotronic Lab Emoji VD standalone
    User account for at least one of the available weather services
     
    FEATURES
    With Netatmo Weather station suite or Netatmo Public Weather station suite gives best support for Irrigation Control watering adjustment Works with 7 most popular weather services on the planet Regularly refreshes weather state and forecast User can setup when forecast push and popup notifications will be sent same as e-mail with complete forecast User can install more than one set of VD’s and follow weather for more than one place It is now separated from Netatmo weather station but can still display Netatmo measurements (will be available only with UHAS version) User can add additional sensor for lux and UV Automatically finds weather provider plugin if installed and can then update weather on the HC2 web GUI and mobile applications VD has built in multi-language support with 27 languages included (see APPENDIX 1 for the list). VD can use HC selected language or user can select any other available language. VD will automatically translate current weather and forecast data to selected language Easy setup for VD icons. User can download HC2 Icon Preview VD to easily find icon ID numbers Global variables are automatically added, monitored, repaired and cleaned and does not require user intervention Supported are metric and imperial units for measured data. Wind speed can be set to show in meter per second (m/s) instead of km/h or mph  
    INSTALLATION AND UPGRADE
    Please check provided User Manual
     
    PACKAGE CONTENT
    Weather State VD v2.8.1 Weather Forecast VD v2.8.1 Weather Module scene v2.8.1 (only one scene needed for multiple VD installed)  Icon pack 1 - standard HC weather icons Icon pack 2 - flat weather icons provided by Wunderground User manual EN v2.2  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the ABC VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
    VERSION HISTORY
    2.8.1 - Weather Unlocked forecast extended for better support for Irrigation Control VD. Also corrected Weather API rain precipitation display 2.8 - Added new weather services and resolved some bugs, see bellow or User Manual for more details. 2.7.1 - Corrected bug that prevented using Wunderground, corrected day/night weather icons and other bugs. 2.7 - Added scene for safe communication with weather servers. Added e-mail notifications. Added 3 more weather services and updated WU service... For more detailed list check bellow 2.4 – VD completely redesigned and added openweathermap 5 day / 3 hour forecast. VD's update is synced to always have up to date weather info. Solved some more bugs 2.3.1 – Solved bug with Weather State VD update button 2.3 – First release on Fibaro marketplace  
     

    2,255 downloads

       (7 reviews)

    24 comments

    Updated

  7. Gardena Status

    Main features
    Watch and control Gardena Smart System devices. 
     
    Connects to your Gardena account, retrieves information about smart devices configured within that account and allows you to control them. Installation if fully automated: there is only a single scene to provide status gathering, sending commands and creating virtual devices in HC2.
    Advantages
    Detection of new Gardena devices and automatic creation of corresponding Fibaro virtual devices. Polish and English languages are supported. Easy installation: just put your account information and start the scene. Source code is easy to maintain and develop (rich debug information, separation of supported device types from data presentation, translation system included, etc.). Five categories of Gardena devices supported: gateway, irrigation control, watering valve, sensor, and mower.
    What you need 
    At least Gardena Smart Gateway configured and access to your Gardena account. Any sensor, watering device or mower connected to that account will become available in Fibaro ecosystem.
    Installation
    Create LUA scene with the file provided in the archive. Put your Gardena account details (GARDENA_ACCOUNT and GARDENA_PASSWORD). Start the scene - it will automatically create global variables and virtual devices based on your account information. Update virtual device: set names, icons and categories as you wish. Optional configuration
    Read comments in Lua scene.
    Each configuration parameter is described there in detail.
    FAQ
    I don't want to import all devices from my account. How to achieve that?
    You may do that by configuring IGNORE_CATEGORY variable if you would like to exclude all devices of a given type (like "sensor") or you may remove unwanted VDs manually and change CREATE_VIRTUAL_DEVICES to false so as not to recreate deleted devices.
    Can I use two or more Gardena accounts in my HC2?
    Sure. Just make a clone of the main Lua script, update account details and give a unique value to ACCOUNT_UNIQUE_ID variable.
    Can I provide my own translation or change fields displayed in a virtual device?
    Yes, it is simple. All language specific information is given in two variables: translations and repeatedTrans. Look for them in source code and that should make things clear. Also field definitions are provided in source code. Look for "TYPEconfig" variable (mowerConfig, e.g.) and change what you need. For labels the first value in each item is a number used for ordering elements, second is a default (English) label, third is a format ([d] is for timestamps, [u ] is for units retrieved from Gardena API). In the end, remember to use UPDATE_DEVICE_DEFINITION variable to apply changes in virtual device definition.
     

    110 downloads

       (3 reviews)

    4 comments

    Updated

  8. Hydrawise Control VD standalone

    Hydrawise Control VD v1.0 standalone
    KNOWN ISSUES - BUGS
    VD constantly sending messages about watering delay if rain is detected and stops functioning properly.
    SOLUTION - Please download Main loop code and paste it over current code in VD main loop ---> Hydrawise Main loop v1.1.lua
     
    INTRODUCTION
    Hydrawise Control VD provides seamless integration of Hunter Hydrawise irrigation controllers with Fibaro Home Center 2. It uses Weather State and Forecast module made by same author in its latest version to automatically delay watering depending on current and forecast rain precipitation.  
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.620 or greater with devices added to the Sprinklers panel
    Hunter Hydrawise irrigation controller with account and generated API key
    Sankotronic Lab Emoji VD v1.1 standalone
    Sankotronic Lab Weather State & Forecast suite v2.8.1 or greater
    Recommended Sankotronic lab Netatmo Weather Station suite v3.3.1 or Netatmo Public Weather Station suite v1.0
     
    FEATURES
    Automatic watering delay - Works with Weather State & Forecast suite and 7 most popular weather services on the planet to automatically delay watering depending on current and forecast rain precipitation. It is also recommended to use Netatmo Weather Station suite or Netatmo Public Weather station for more accurate measurements of rainfall. Manual watering - User can activate any selected watering zone or all zones manually with preselected duration. Manual watering delay – user can manually set watering delay for one, several or all zones. Watering state at a glance - VD icon shows current overall status of the watering system by changing VD main icon and label accordingly. Weather history – VD is recording weather state and forecast measurements for last 7 days by default. User can change number of history days. Multi-language support - VD has built in multi-language support with 27 languages included (see APPENDIX 1 for the list). VD can use HC selected language or user can select any other available language. E-mail and push messages are also translated
    VD Icons setup - Easy setup for VD icons. User can download HC2 Icon Preview VD to easily
    find icon ID numbers
    Global variables - are automatically added, monitored, repaired and cleaned and does not require user intervention  
    INSTALLATION
    Please check provided User Manual
     
    PACKAGE CONTENT
    Hydrawise Control VD v1.0 Icon packs User manual EN v1.0  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the ABC VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
    VERSION HISTORY
    1.0 - First public release  
    LOOK AND FEEL
    Peek in spoiler:
     
    Enjoy coding and your new Hydrawise Control! 
    Sankotronic

    46 downloads

       (0 reviews)

    3 comments

    Updated

  9. Twinkly Light VD

    Twinkly Light VD v1.0
    (standalone version)
    IMPORTANT NOTIFICATION!
    If you plan to continue use this VD with your Twinkly LED then DO NOT update them to latest firmware 2.7.1 because it will stop working!
    Some companies just refuse to understand importance of HA integration and it is just up to some geeks to publish unofficial API and make integration possible.
     
    INTRODUCTION
    Twinkly lights brings amazing effects and most stunning light animations to users fingertips. This beautiful Christmas lights can now be controlled by our Fibaro gateways.
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.120 or higher At least one Twinkly light (1st or 2nd generation) connected to home WiFi network with static IP address setting. VD is tested with 190 RGB LED icicle and 250 RGB LED strings of 2nd generation  and also strings of 1st generation at the time of publishing  
    FEATURES
    User can install multiple instances of VD for as many Twinkly lights he/she might have. Only one scene is needed to be installed for any number of Twinkly Light VD’s Uses local WiFi network connection for control. Provides turning on/off and changing brightness of the Twinkly light.
    Provides control from other code and scenes by using global variable and Update button. Multi language support with 27 languages. VD will be automatically translated to HC selected language or user can select any other available language. Easy setup for VD icons with automatic setup of icons for buttons and sliders too. (UHAS™ compatible version has even more easier icon setup) Self adding and checking of global variable data integrity. Automatic repair of global variables without user intervention  
    INSTALLATION
    Please check provided User Manual where all steps are explained in detail and video kindly provided by @MarcoTorino71:
     
    PACKAGE CONTENT
    Twinkly Light VD v1.0 (standalone) 2 icon sets for VD (icicle and strings) Twinkly Light Scene with icon User manual v1.0 EN  
    CREDITS
    The Author wishes to acknowledge the help received from the Fibar Group S.A. in that they have kindly supplied the use of a HC2 for development purposes, free of charge.
    The Author also wishes to thanks to Pavol Babinčák for providing unofficial API reference documentation for Twinkly – Smart decoration LED lights for Christmas. Big thanks to @MarcoTorino71 for video!
     
    TERMS AND CONDITIONS
    Permission to use, copy, modify, and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement, is hereby granted, provided that the copyright notice, with "Terms and Conditions" and "Disclaimer" appear in all copies, modifications, and distributions.
    It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author. 
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the Twinkly Light VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required. 
     
    LEGAL NOTICE
    Twinkly is registered trademark of LEDWORKS SRL registered in Italy and other countries.
     
    VERSION HISTORY
    1.0 - First release of standalone version build on VD code for UHAS™
     
    Here is look of the Twinkly Light VD:
     

     
    Enjoy coding and your new Twinkly Light virtual device!
    Sankotronic  

    179 downloads

       (2 reviews)

    4 comments

    Updated

  10. Sonos API Player VD standalone

    Sonos API Player VD v1.0 standalone
     
    INTRODUCTION
    Sonos is the ultimate wireless home sound system that brings brilliant sound to all parts of house, room by room. Sonos API Player VD enables Fibaro Home Center 2 to control Sonos Wi-Fi multi-room speakers and show their status using node-sonos-http-api as mediator between Sonos and Fibaro.
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.620 or greater
    Node.js capable device such as Raspberry PI with installed jishi node-sonos-http-api
    One or more Sonos Wi-Fi multi-room speaker
    Sankotronic Lab. Emoji VD v1.1 or greater
     
    FEATURES
    Support for My Sonos stations and playlists. User can easily get list of My Sonos stations and playlist to VD and start playing from VD or other VD and scene code Support for grouping actions join and leave Support for Spotify, Apple Music and Amazon music Support for text to speech TTS for Google, VoiceRSS and AWS Poly Support for playing clips for e.g. doorbell or alarm functions Supports all standard audio commands PLAY, PAUSE, STOP, PREVIOUS, NEXT, MUTE/UNMUTE, SHUFFLE, REPEAT and CROSSFADE Support for all other functions available by jishi node-sonos-http-api Debug mode with different levels
    Multi language support with 27 languages included (see APPENDIX 1 for the list). VD can use HC2 selected language or user can select any other available language. VD will be automatically translated to the selected language
    Easy setup for VD icons. User can download HC2 Icon Preview VD to easily find icon ID number Global variables are automatically added, monitored and repaired and does not require user intervention  
    INSTALLATION
    Please check provided User Manual
     
    PACKAGE CONTENT Sonos API Player VD v1.0 User manual EN v1.0  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of this VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
    VERSION HISTORY
    1.0 - First public release  
    LOOK AND FEEL
    Peek in spoiler:
    Enjoy coding and your new Sonos API Player VD!
    Sankotronic

    161 downloads

       (0 reviews)

    1 comment

    Submitted

  11. Netatmo Public Weather Station suite

    Netatmo Public Weather Station suite standalone
     
    INTRODUCTION
    Netatmo Public Weather station suite brings local weather data to users that do not have their own personal weather station. It is must have in combination with Weather State & Forecast suite to provide better control of your beautiful garden irrigation system.
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.160 or greater
    Sankotronic Lab. Emoji VD standalone
    Netatmo Weather station
     
    FEATURES
    Great solution for users that do not have personal weather station. Can be used together with Weather State & Forecast suite to provide necessary data to Irrigation Control VD for watering adjustments and delays.
    Integration of nearest public Netatmo weather station with HC2 including rain gauge and anemometer
    Support for multiple public Netatmo weather stations
    Smart update system that follows Netatmo weather station cloud updates
    Public Netatmo weather station measurements can be shown on Weather State VD and HC2 web GUI and mobile applications by means of Weather State VD and Weather provider plugin
    VD has built in multi-language support with 27 languages included (see APPENDIX 1 for the list). VD can use HC selected language or user can select any other available language.
    Easy setup for VD icons (on UHASTM compatible version is this even easier)
    Global variables are automatically added, monitored and repaired and does not require user intervention
     
    INSTALLATION
    Please follow the instructions provided in User manual
     
    PACKAGE CONTENT
    Netatmo Public module VD Netatmo Public Weather station scene Set of icons User manual EN  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the ABC VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
    VERSION HISTORY
    1.0 - First public release  
    KNOWN ISSUES
    In some cases if found station does not have street defined scene can stop running on error [fatal] LUA error: /opt/fibaro/scenes/17.lua:69: attempt to concatenate field 'street' (a nil value) . If have such error please download this update and paste over current version scene: Netatmo Public Stations scene v1.0.1.lua.zip  (updated 30. May 2021) After error in getting weather data from servers flag is set, but then after successful reading data from servers flag is not reset. Solution is to download scene v1.0.1 provided link above. (updated 02. June 2021)  
    Here is look and feel of the Netatmo Public Weather VD:

    Enjoy coding and your new Netatmo Public weather station suite! 
    Sankotronic

    92 downloads

       (0 reviews)

    0 comments

    Updated

  12. Netatmo Weather Station suite standalone

    Netatmo Weather Station suite standalone
     
    INTRODUCTION
    Netatmo Weather station suite brings complete integration of Netatmo weather station to HC2 users including rain and wind gauges and support for more than one station.
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.160 or greater
    Sankotronic Lab. Emoji VD standalone
    Netatmo Weather station
     
    FEATURES
    Complete integration of Netatmo weather station with HC2 including rain gauge and anemometer
    Support for multiple Netatmo weather stations
    Support for maximum 3 additional indoor modules
    Smart update system that follows Netatmo weather station cloud updates
    Completely independent installation does not require any more Weather State VD or Main scene FTBE
    Netatmo weather station measurements can be shown on Weather State VD and HC2 web GUI and mobile applications by means of Weather State VD and Weather
    provider plugin
    VD has built in multi-language support with 27 languages included (see APPENDIX 1 for the list). VD can use HC selected language or user can select any other available
    language.
    Easy setup for VD icons (on UHASTM compatible version is this even easier)
    Global variables are automatically added, monitored and repaired and does not require user intervention
     
    INSTALLATION
    Please check provided User Manual and video from @MarcoTorino71:
     
    PACKAGE CONTENT
    Netatmo Main module VD Netatmo Outdoor module VD Netatmo Additional indoor module VD Netatmo Wind sensor VD Netatmo Rain sensor VD Netatmo Weather station scene Set of icons for all VD's and scene User manual EN  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the ABC VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
    VERSION HISTORY
    3.3.1 - Scene code changed to get rain amount for past 3 adn 6 hours to better support Irrigation Control VD. All VD's corrected some translations. Rain gauge VD changed labels content to display last 3 hours rain amount 3.3 - Check below version description or consult User manual for more details 3.2 - Corrected rain sensor code and cleaned some bugs in scene. Indoor modules corrected handling of CO2 measurement, improved updating code. 3.0 – This new version is completely redesigned and made independent. Does not require Main scene FTBE and Weather State VD anymore. Updating is now synced with Netatmo cloud so readings are always up to date. 2.0.2 – Code optimized and resolved some bugs   Here is look of the Netatmo Weather set:

     
    Enjoy coding and your new Netatmo weather station suite! 
    Sankotronic
     

    2,866 downloads

       (4 reviews)

    52 comments

    Updated

  13. Watering - adjust and history

    1. Adjust Watering Scene
     
    Features:
    adjusts watering time sends email/push about watering conditions saves historical watering conditions  
    This scene allows you to adjust watering time based on
    current rain forecast rain (till noon) current temperature forcast temperature  
    You can change watering conditions as you like in adjustWatering() function.
    For example:
    if current rain >= 1 mm then turn off watering for 24h if forecast rain >= 2 mm then turn off watering for 24h if current rain >= 0.5 mm then decrease watering duration by 30% if current temperature >= 30°C then increase watering duration by 40% if current temperature <= 1°C then turn off watering for 24h if forecast temperature <= 1°C then send warning about frost  
    The scene requires Sankotronic's 'Weather State and Forecast VD'.
    Tested with "Weather State and Forecast v2.7.1 standalone"
    Supports almost all services supported by 'Weather State and Forecast VD':
    OpenWeatherMap (only daily version) Dark Sky WeatherBit Weather HERE  
    You can change it as always at Sankotronic's 'Weather State VD'.
     
    Customization:
    local vdID = 476 -- ID of 'Weather State VD' from which we will take data local sendEmail = true -- change to false if you don't want to receive emails local sendPush = true -- change to false if you don't want to receive push messages local emailUserId = 2 -- user id to send emails local pushDeviceId = 0 -- mobile device id to send push messages Watering schedule should be set in sprinkler panel.
    I scheduled running this scene everyday 15 minutes before planned start of irrigation.
    The scene increases/decreases watering time of all sprinklers.
     
    Optional modules:
     
    2. Watering History VD
     
    Features:
    shows watering time for the last 7 days shows watering conditions for the last 7 days (gathered by Adjust Watering Scene) shows current watering state (on/off) shows current watering mode (auto/manual) shows watering plan allows to change watering mode (auto/off) allows to run watering once (15/30/60 min)  
    Customization:
    buttons code:
    local sprinklerNr = 1 -- sprinkler number (1, 2, 3, ...) VD supports only one sprinkler. If you want to see the watering history of more sprinklers then you have to create separete VD for every sprinkler. Remember to set sprinklerNr variable for every of them.
     
    3. Netatmo Scene
     
    If you don't have your own Netatmo Station, then you can use the neareast station in your location.
    All public stations you can check here: https://weathermap.netatmo.com
     
    The rain data from the netatmo are much better than the data from Forecast Weather Service. Especially if the rain Netatmo station is near your location.
     
    All you need is:
    a) copy the code from Netatmo.lua and paste it into Sankotronic's 'SA_Weather_Module_scene' at the end of file
    b) sign up to get access data (https://auth.netatmo.com) and fill these fields in pasted Netatmo Scene code. Client ID and Client Secret token you can get when you create app on site https://dev.netatmo.com/apps/
    local n_client_id = "" local n_client_secret = "" local n_username = "" local n_password = "" c) then change these variables values in the main loop of Sankotronic's 'Weather State VD' as follows:
    local netatmoWeather = true local netatmoRain = true d) if Sankotronic's 'Weather State VD' doesn't show netatmo values then increase distance to find a rain gauge in pasted Netatmo Scene code:
    local long_lat_adjust = 0.1 Enjoy...
     

     

    234 downloads

       (0 reviews)

    4 comments

    Updated

  14. Shelly_IP101.vfib

    This VD is a interface to the ping_shelly.lua which can also be found here. The IP-address needs to be configured as shown in the image. The port value ("109") is used/misused to set the number of the lua script in your HC2  ("_lua").
    As example here the code for the "on" button:
    local _self=fibaro:getSelfId() local _addr=fibaro:getValue(_self,"IPAddress") local _lua=fibaro:getValue(_self,\"TCPPort\") fibaro:startScene(_lua,{_addr,"on"}) fibaro:sleep(1000) fibaro:startScene(_lua,{_addr}) fibaro:sleep(1000) local _slider = tonumber(fibaro:getGlobalValue("S" .. string.gsub(_addr,"%.","_"))) if (_slider <= 0) then _slider=10 fibaro:startScene(_lua,{_addr,_slider}) end fibaro:call(_self,"setProperty","ui.brightness.value",_slider)  
     

    49 downloads

       (0 reviews)

    0 comments

    Updated

  15. Emoji VD standalone

    Emoji VD standalone
     
    INTRODUCTION
    Emoji VD brings more than 950 nice small icons to Home Center 2. Emojis are sorted in logical groups and named with short names to make them much easier to find and use in user code. I’m using them in my work to reduce need for translations and also to enhance look and feel of virtual devices. Another reason why I made this VD is to avoid problems with listing code in some editors that might still have problems with displaying emojis due to different UTF coding.
     
    IMPORTANT NOTICE
    All my future work will require Emoji VD to be installed
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.580 or greater
     
    FEATURES
    Brings more than 950 emojis to HC2
    Simple installation and setup.
    Users can easily find any emoji needed because they are separated in logical groups and VD shows their names that can be used in code.
    Global variables are automatically created, monitored and repaired and no user action needed. Just import Emoji VD, setup icon and room and start using it.
     
    INSTALLATION AND UPGRADE
    Please check provided User Manual
     
    PACKAGE CONTENT
    Emoji VD Icon pack User manual EN  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the Emoji VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     

    542 downloads

       (0 reviews)

    3 comments

    Updated

  16. COVID-19 Stats suite

    COVID-19 Stats suite standalone
     
    INTRODUCTION
    COVID-19 Stats suite consists of virtual device and two scenes. It is using free COVID-19 API released by Kyle Redelinghuys. VD is getting back details about global and regional coronavirus data, including latest numbers that are updated close to real-time by gathering information from Johns Hopkins CSSE.
     
    PREREQUISITES Fibaro Home Center 2 with firmware 4.580 or greater
    Sankortonic Lab. Emoji VD standalone
     
    FEATURES
    COVID19 Stats suite is getting details about global and regional corona virus spread and show them on Fibaro mobile app or browser connected to HC2 home page.
    Uses COVID-19 API built by Kyle Redelinghuys to show latest data on corona virus spreading.
    Provides total global pandemic numbers for total and new cases, total and new deaths and total and new recovered cases and total active cases.
    Provides user to select default country to monitor corona virus latest numbers
    Provides user to check corona virus latest numbers for 190 countries worldwide.
    Provides global variable trigger that user can setup to be updated either by global total active cases or their default country active cases. This trigger can then be used to start scene that will send notifications using any available service.
    Multilingual support with 27 languages included. VD can use HC2 selected language or user can select any other available language. VD will be automatically translated to selected language
    Easy setup for VD icons
    Global variables are automatically created, monitored and repaired.
     
    INSTALLATION
    Please check provided User Manual
     
    PACKAGE CONTENT
    COVID-19 Stats VD COVID-19 Stats scene COVID-19 Triggered scene Icon pack for VD and scene User manual EN Updated code for scene and VD main loop and Update button  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the COVID-19 Stats suite. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.

    216 downloads

       (1 review)

    0 comments

    Updated

  17. Internet_connection.vfib

    Internet_connection.vfib

    98 downloads

       (0 reviews)

    0 comments

    Submitted

  18. Advanced Battery Check (ABC) VD standalone

    INTRODUCTION
    Advanced Battery Check VD (further in text ABC VD) scans for all included battery devices and adds them to the list sorted by either battery level, device ID or room ID depending on user settings. Also it can send list of all devices or just devices that needs battery to be replaced to e-mail and/or popup. Can also send push notification with the worst battery status.
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.160 or greater  
    FEATURES
    Scans for all battery powered devices adds them to the list and shows their battery level status. It is possible to scroll through the list of battery devices and see battery level, type, amount of battery needed for selected device and price of the battery (if entered by user). Easy adding or removing battery devices to be ignored Included 30 types of battery devices (products) in ABC VD version 1.0 for the list please check APPENDIX 2 Automatic recognition and adding of not included types of devices (products) for which user can setup battery type, amount needed and price Predefined types of battery types including Unknown and Rechargeable Sends list of all battery devices found or only dead devices and devices with battery level bellow 35% to e-mail and popup notification depending on user selection. Calculates total price for devices that need battery replacement on the bottom of the list sent to e-mail (user need to setup currency and price for batteries) Sends push notification for device with lowest battery level found or dead device It can automatically remember date when battery is replaced on device after updating the list. This is done by comparing previous measured battery level with the currentone. VD has built in multi-language support with 28 languages included (see APPENDIX 1 for the list). VD can use HC selected language or user can select any other available language. VD will be automatically translated to selected language (visible after refreshing page on browser or refreshing network data on Fibaro mobile application) Easy setup for VD icons (on UHASTM compatible version is this even easier) Global variables are automatically added, monitored and repaired and does not require user intervention  
    INSTALLATION
    Please check provided User Manual and video provided by @MarcoTorino71:
     
    PACKAGE CONTENT
    Advanced Battery Check VD v.1.0 Standalone Icon pack User manual EN  
    TERMS AND CONDITIONS
    Permision to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licencing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions.
    It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the ABC VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
    VERSION HISTORY
    1.0 – First release used as a base for UHAS version
     
    Here is look of the ABC VD:

    Enjoy coding and your new ARM virtual device! 
    Sankotronic

    846 downloads

       (0 reviews)

    22 comments

    Updated

  19. Main scene FTBE

    Main scene FTBE v1.3.4
     
    UPDATE (30 December 2019)
    Changed only Main scene FTBE code. Changed function for time of day calculation and added use of SleepState global to set time of day to morning when Awake and current time is between midnight and sunrise time.
     
    KNOWN ISSUES v1.3.4
    Sunrise and Sunset VD will not show correctly default sunrise and sunset time set by user in Main scene in case that that times are used due to problem with HC settings. If sunset time is before sunrise time then user must check that night time is not set to start after sunrise. Sunrise & Sunset VD does not check this time automatically. INTRODUCTION
    Main scene FTBE is the beating heart of the HA system. It is the only scene necessary to loop endlessly because it is the source of most important events generated on our gateways and that are time based events! It is looping once every minute making sure that our gateways are aware of the current time, part of the day, week, month and season of the year. Many actions done by our gateways are depending on current time like raising or lowering blinds, lighting control, waking up of our home and us, brewing coffee at proper time (this is extremely nice!), reminding us of important events and many other things. This scene will take care of that  by changing various global variables at appropriate time thus activating other scenes triggered by them and the user can even configure it to start other scenes or press buttons on VD's at predefined intervals or at scheduled times.
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.110 or greater FEATURES
    Consists of scene and three VD's. Main scene FTBE loops and takes care of all timers like darkness, time of day, week days, month and season. Can also be setup to run other scenes, activate buttons on VD's or change global variables value at predefined times. VD's are used to set values of timers and show them on HC2 interface Can be setup to send push messages for scheduled execution of scenes and VD's Can track users location and calculate distance from home Darkness can be changed either by user set sunrise and sunset times or by light level measured by devices Part of the used global variables are automatically added to the system by Sunrise & Sunset VD and are automatically repaired INSTALLATION & UPGRADE
    Please check provided User Manual where all steps are explained in detail and check video from @MarcoTorino71:
    PACKAGE CONTENT
    Main scene FTBE v1.3.4 Sunrise & Sunset VD v1.4.0 Home Status VD v1.0 Home Timers VD v1.0.1 Icons for scene and VD's User Manual EN v1.3 CREDITS
    Many thanks to many Fibaro forum users for help with testing and suggestions for improvements.
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions.
    It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the Main scene FTBE. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     
     

    2,692 downloads

       (3 reviews)

    17 comments

    Updated

  20. ZeverSolar Monitor

    Poniżej pierwsza wersja kodu dla Fibaro VD odczytująca dane z falownika  ZeverSolar -instalacji fotowoltaicznej dostępne po sieci lokalnej: adresIP/home.cgi. 
     
    VD ZeverSolar wymaga tylko wpisania swojego adresu IP
    VD ZeverSolar umożliwia:
    1. Prezentacje danych: czas odczytu, wartość chwilowa pacW,  wielkość produkcji dziennej.
    2. Przycisk wymuszający odczyt on demand "Update?".
    3. Zapis zmiennych globalnych pacW, etodayKWh.
     

     

    64 downloads

       (1 review)

    0 comments

    Updated

  21. Samsung Air Conditioner

    Since Samsung Plugin doesn't work I decided to write custom Samsung Air Conditioner VD.
     
    Requirements:
    Samsung AC Local PHP server (NAS, RPI, ...)  
    Installation:
    Copy smarthome folder to your php server Edit/rename Bedroom.php, Living room.php files. For each device you need separate file. In each file: enter IP of your AC device enter token of your AC device To get token follow steps 3.1 - 3.5 from this site. Check if your PHP server is working: http://192.168.0.10/smarthome/samsung-ac/Bedroom.php
    Of course change 192.168.0.10 with the IP of your PHP server.
    You should see JSON result with status. Something like this: { "power": "Off", "mode": "Cool", "virusDoctor": "Off", "quiet": "On", "wind": "Fix", "temperature": 22, "currentTemperature": 23, "sleep": 0 } Install Air Conditioner VD Edit Air Conditioner VD:
    Room name must be the same as your PHP file name without .php extension, e.g. Bedroom Enter Address IP of your PHP server, e.g. 192.168.0.10 Port number of your PHP server, usually 80 Add VD icons and enter icons ID at "refresh" button section:
     
    Enjoy...
     

    110 downloads

       (0 reviews)

    0 comments

    Submitted

  22. piCorePlayer

    Vertual Device to control piCorePlayer on raspberrypi
     

    16 downloads

       (0 reviews)

    0 comments

    Updated

  23. Dane ze stacji meteorologicznej UMK

    Urządzenie wirtualne wyświetlające parametry pogodowe pobierane ze stacji meteorologicznej UMK. Najbardziej przyda się osobom z Torunia i okolic
     
    Samo urządzenie wyświetla dane ze zmiennych globalnych, które są przy pomocy api fibaro aktualizowane przy pomocy skryptu php. Wymagane jest wobec tego posiadanie w sieci lokalnej serwera z apachem i php oraz dodanie skryptu do harmonogramu zadań cron dla cyklicznej aktualizacji.
     
    Mam nadzieję, że komuś się przyda. 
     
    Pozdrawiam 
    m4fibaro_umk_meteo_php.zip

    14 downloads

       (0 reviews)

    0 comments

    Updated

  24. [VD] Daily Triggers

    Daily Triggers
    First release on french board in April 2018
     
    INTRODUCTION
    This VD was my first contribution on the french forum. I was so glad! I learnt to use LUA tables just before and I wanted to use them in a VD which can be useful.
    This VD allows you to easily manage some one-time actions for each day in a week. With it, you quickly can change the time to trigg one or many actions, or see when an action will be done. It's possible to set one our per day, using a time shift if needed.
    It's my first VD, I was learning how to program in LUA and I was beginning to work with time in LUA, so it's not perfect in the programming way, but it works! I used it for a long time and I have never met any issue!
     
    INSTALLATION
    Create a Global Variable called VD_TRIGGERS Import the VD Change the Icons ID in the Main Loop, using the icons below -- Icons IDs local icone_ok = 1156 local icone_wait = 1158 local icone_no_trigg = 1155 local icone_triggers_off = 1157 local icone_vd_off = 1160 Add your to-do actions for each day with the totrigg() function, into the Main Loop -- To do each day local function totrigg(day) -- Here actions for everyday if day == 1 then -- Actions for Monday elseif day == 2 then -- Actions for Tuesday elseif day == 3 then -- Actions for Wednesday elseif day == 4 then -- Actions for Thursday elseif day == 5 then -- Actions for Friday elseif day == 6 then -- Actions for Saturday elseif day == 7 then -- Actions for Sunday end end  
    VD CONFIGURATION AND USE
     
    This VD is divided into 4 parts :
    Information about the next trigger The Programmer View on all triggers set Enable/Disable VD  

     
    3 Sliders and the OFF button can be used to prepare trigger informations : Hours Sliders will convert 0-100 value to 1 - 23 in the programmer Minutes Sliders will convert 0-100 value to 1 - 59 in the programmer Time Shift Sliders will convert 0-100 value to -30 - +30 in the programmer Please take care to set 0 (Slider at 50) if you want to trigg your actions at the time set! OFF Button will replace all the programmer's informations by OFF If you want to set a new time information, you only need to click on any slider above After each slider move, check the Prog Label content to avoid any error Once the Prog content is correct and checked, you can affect its value for each day you want by simply clicking on its name! You will be able to see the affected times just 3 seconds after in the Triggers Views At this time, the actions set in the totrigg() function will be done Of course, if the VD is disabled, no actions will be triggered  
    ICONS

     
    Waiting to trigg today's action Today's action triggered No action planned today (OFF) All triggers set at OFF VD OFF

    74 downloads

       (0 reviews)

    0 comments

    Updated

  25. ZXT-120 AC control VD

    This is a simple VD+Scene to control ZXT-120 AC controllers. I use it because of 2 factors:
    1) You can control everything on one screen instead of 3 devices in HC2 interface
    2) it is visible in Home Center app (ZXT-120 is not visible natively yet)
    It supports heating and cooling modes and fan speed. You can see current status as well.
    Setup is very simple:
    VD - just put ID of the child device of ZXT-120 which controls temperature into the "Port" field of VD
    Scene - You have to put IDs of three child deviced of ZXT in the triggers field annd the same ID into "Options" part of the scene. Also put VD ID inn the "Options" part.
    Maybe it can be useful for some of you.
    ZXT-120.zip

    106 downloads

       (1 review)

    1 comment

    Submitted


×
×
  • Create New...